General Operating Safety, Adding Fuel | Snapper 2400 XL Series

Features & Controls

Catcher Open/Close Lever

The catcher open/close lever opens the catcher so that it may be emptied and closes it for mowing. To empty the catcher, depress the catcher dump lock pedal and pull forward on the handle. To close, push the lever back- ward until the catcher closes and locks.

12V Power Outlet

The power outlet is 12V-DC. Accessory must be rated at 14 amps or less.

Reverse Mowing Option (RMO)

The Reverse Mowing Option allows for mowing (or use of other PTO driven attachments) while traveling in reverse. If you choose to mow or operate another attachment in reverse, turn the RMO key after the PTO is engaged. The L.E.D. light will illuminate, and the opera- tor can then mow in reverse. Each time the PTO is dis- engaged the RMO needs to be reactivated if desired.

Operating the Tractor

GENERAL OPERATING SAFETY

STARTING THE ENGINE

Be sure to read all information in the Safety and Operation sections before attempting to operate this unit. Become familiar with all of the controls and how to stop the unit.

ADDING FUEL

To add fuel:

1.Remove the fuel cap (A, Figure 2).

2.Fill the tank. Do not overfill. Leave room in the tank for fuel expansion. Refer to your engine manual for specific fuel recommendations.

3.Install and hand tighten the fuel cap.

Do not use gasoline containing METHANOL, gasohol containing more than

10% ETHANOL, gasoline additives, or white gas because engine/fuel system damage could result.

WARNING

Gasoline is highly flammable and must be handled with care. Never fill the tank when the engine is still hot from recent operation. Do not allow open flame, smoking or matches in the area. Avoid over-filling and wipe up any spills.

1.While sitting in the operator’s seat, fully depress the brake pedal or set the parking brake.

2.Make sure that your feet are not depressing the ground speed control pedals and that the cruise con- trol lever is in neutral.

3.Disengage the PTO clutch.

4.Close the choke.

NOTE: A warm engine may not require choking.

5.Insert the ignition key and turn it to START.

6.After the engine starts, move the engine throttle con- trol to SLOW. Warm up the engine by running it for at least a minute.

7.Set throttle to FULL.

NOTE: In the event of an emergency the engine can be stopped by simply turning the ignition switch to STOP. Use this method only in emergency situations. For nor- mal engine shut down follow the procedure given in

STOPPING THE TRACTOR.

STOPPING THE TRACTOR & ENGINE

1.Return the ground speed control(s) to neutral.

2.Disengage the PTO and wait for all moving parts to stop.

3.Place the throttle control in the position specified in the engine owner’s manual provided in the operator's packet shipped with your tractor. Follow any recom- mended stopping procedures.

4.Turn the ignition switch to OFF. Remove the key.

RD Series, 2400 XL Series specifications

The Snapper 2400 XL Series and RD Series represent the pinnacle of outdoor power equipment, embodying a perfect blend of performance, durability, and user-friendly design. Engineered for both residential and commercial applications, these models are specifically crafted to cater to a wide range of mowing needs.

The Snapper 2400 XL Series, known for its robust construction, features a powerful engine that delivers exceptional performance and reliability. With a cutting deck size that varies, users can choose options ranging from 21 inches to 30 inches, ensuring versatility for different yard sizes and conditions. This series utilizes a patented rear-engine design which provides superior visibility and maneuverability, making it ideal for navigating tight spots and landscaping around obstacles.

One of the standout technologies in the 2400 XL Series is the Instant Response Transmission. This system allows for smooth acceleration and responsive steering, which enhances user control. Additionally, the mowers are equipped with an adjustable cutting height feature, allowing for precision mowing to accommodate varying grass types and conditions.

Transitioning to the RD Series, it boasts a unique dual-blade system that enhances cutting efficiency. The dual blades create finer clippings, which decompose faster, resulting in healthier grass. The RD Series is designed with heavy-duty wheels and a reinforced steel frame, ensuring it can handle the rigors of challenging terrains while maintaining stability and control.

Both series highlight Snapper's commitment to comfort and user experience. Each model is ergonomically designed with comfortable grips and adjustable seating, reducing fatigue during extended mowing sessions. Moreover, the easy-start engine technology ensures that users can get to work without fuss, even in cold weather conditions.

Durability is a key characteristic of both the 2400 XL and RD Series. Constructed with high-quality materials, including corrosion-resistant surfaces, these mowers are built to withstand the elements and provide long-lasting performance. With exceptional warranty options, users can rest assured knowing their investment is protected.

In summary, the Snapper 2400 XL Series and RD Series incorporate advanced technologies and features designed to enhance mowing efficiency, comfort, and durability. With a focus on performance and ease of use, these mowers are ideal for homeowners and landscaping professionals alike, ensuring a clean, precise cut season after season. Users can confidently choose Snapper for their outdoor power equipment needs, knowing they are backed by a brand renowned for innovation and quality.