Snapper RD Series, 2400 XL Series manual Engine, Transmission, Dimensions, Chassis

Page 37

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

*The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) (Revision 2002–05). Given both the wide array of products on which our engines are placed, and the variety of environmental issues applicable to operating the equipment, it may be that the engine you have purchased will not develop the rated horsepower when used in a

piece of power equipment (actual “on–site” power). This difference is due to a variety of factors including, but not lim- ited to, the following: differences in altitude, temperature, barometric pressure, humidity, fuel, engine lubrication, max- imum governed engine speed, individual engine to engine variability, design of the particular piece of power equip- ment, the manner in which the engine is operated, engine run–in to reduce friction and clean out of combustion chambers, adjustments to the valves and carburetor, and other factors. The power ratings may also be adjusted based on comparisons to other similar engines utilized in similar applications, and will therefore not necessarily match the values derived using the foregoing codes.

ENGINE:

20 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

Vanguard

Horsepower

20

@ 3600 rpm

Displacement

34.8 Cu. in (570 cc)

Electrical System

12

Volt, 16 amp. Alternator, Battery: 230 CCA

Oil Capacity

48

Oz. (1.4 L)

18 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

Vanguard

Horsepower

18

@ 3600 rpm

Displacement

34.8 Cu. in (570 cc)

Electrical System

12

Volt, 16 amp. Alternator, Battery: 230 CCA

Oil Capacity

48

Oz. (1.4 L)

18 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

Intek 406777

Horsepower

18

@ 3600 rpm

Displacement

40

Cu. in (656 cc)

Electrical System

12

Volt, 16 amp. Alternator, Battery: 230 CCA

Oil Capacity

1-7/8 qt. (1.9L)

TRANSMISSION:

K46

Type

Hydrostatic Tuff Torq K46

Hydraulic Fluid

10w 30 Premium Engine Oil

Capacity

2.6 qt (2,5 L)

Speeds

Forward: 0-5.5 MPH (0-8,8 km/h)

@ 3400 rpm

Reverse: 0-3.5 MPH (0-5,6 km/h)

Continuous Torque

215 ft. lbs. (291 N.m.)

Output

 

Drawbar Rating

440 lbs. (200 Kg)

Maximum Weight

584 lbs. (265 Kg)

on Axle

 

DIMENSIONS

Overall Length

109” (277 cm)

Length (Tractor Only)

76” (193 cm)

Overall Width

37” (94 cm)

Height

At Top of Seat: 44” (112 cm)

Weight (approx.)

 

16HP Tractor

695 lbs. (318 kg)

CHASSIS:

Fuel Tank Cap.

Capacity: 2.5 Gallons (9.5 L)

Rear Wheels

Tire Size: 20 x 10 - 8

Front Wheels

Inflation Pressure: 6-8 psi (,41-,55 bar)

Tire Size: 15 x 6.00-6

 

Inflation Press.: 15 psi (,8-1,0 bar)

35

Image 37
Contents 20HP Hydro Tractors 18HP Hydro Tractors Mower DecksPage Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Safe Handling of Gasoline Service & MaintenanceCE Identification TAG Markings Identification NumbersCE Models Safety Decals Safety DecalsDecal Cutting Height Decal Transmission Release Decal Ignition PositionsOperational Safety Checks Safety IconsControl Functions Features & Controls Adding Fuel General Operating SafetyStopping the Tractor & Engine Operating the Tractor Emptying the Catcher Parking Brake FunctionStorage Attaching a TrailerRemoving the Mower Deck Mower Deck Removal InstallationMuffler and surrounding areas may be hot Installing the Mower Deck Catcher Removal InstallationInstall Mulch Plug Discharge Mulch Plug Installation & Removal Some ModelsPage Fall Before Every SpringTransmission Maintenance Regular MaintenanceBattery Maintenance Check Tire PressuresOil LubricationLubricate Rear Axle Shafts Service Interval YearlyCheck Mower Blade Timing Servicing the Mower Blades4x4 Wood Block PTO Clutch Adjustment Check Safety Interlock System CheckEngine Maintenance SET Mower Belt TensionTroubleshooting, Adjustments, & Service Troubleshooting the Mower Hopper Latch Adjustment Seat AdjustmentPitch Adjustment Seat Slide AdjustmentBrake Adjustment Steering Gear AdjustmentAdjustment Nut NutsCATCHER-FULL Alarm Adjustment Troubleshooting, Adjustment, & ServiceMower Lift Adjustment Battery ChargingAdjust PTO Clutch Window Adjustment Nut Feeler Gauge PTO Clutch AdjustmentTransmission Release Lever Transmission PurgingCutting Height Adjustment Mower AdjustmentsLeveling The Mower Arbor Drive Belt Replacement PTO Belt ReplacementEngine DimensionsTransmission ChassisMaintenance Items Replacement PartsOptional Accessories Technical ManualsPage O D U C T S

RD Series, 2400 XL Series specifications

The Snapper 2400 XL Series and RD Series represent the pinnacle of outdoor power equipment, embodying a perfect blend of performance, durability, and user-friendly design. Engineered for both residential and commercial applications, these models are specifically crafted to cater to a wide range of mowing needs.

The Snapper 2400 XL Series, known for its robust construction, features a powerful engine that delivers exceptional performance and reliability. With a cutting deck size that varies, users can choose options ranging from 21 inches to 30 inches, ensuring versatility for different yard sizes and conditions. This series utilizes a patented rear-engine design which provides superior visibility and maneuverability, making it ideal for navigating tight spots and landscaping around obstacles.

One of the standout technologies in the 2400 XL Series is the Instant Response Transmission. This system allows for smooth acceleration and responsive steering, which enhances user control. Additionally, the mowers are equipped with an adjustable cutting height feature, allowing for precision mowing to accommodate varying grass types and conditions.

Transitioning to the RD Series, it boasts a unique dual-blade system that enhances cutting efficiency. The dual blades create finer clippings, which decompose faster, resulting in healthier grass. The RD Series is designed with heavy-duty wheels and a reinforced steel frame, ensuring it can handle the rigors of challenging terrains while maintaining stability and control.

Both series highlight Snapper's commitment to comfort and user experience. Each model is ergonomically designed with comfortable grips and adjustable seating, reducing fatigue during extended mowing sessions. Moreover, the easy-start engine technology ensures that users can get to work without fuss, even in cold weather conditions.

Durability is a key characteristic of both the 2400 XL and RD Series. Constructed with high-quality materials, including corrosion-resistant surfaces, these mowers are built to withstand the elements and provide long-lasting performance. With exceptional warranty options, users can rest assured knowing their investment is protected.

In summary, the Snapper 2400 XL Series and RD Series incorporate advanced technologies and features designed to enhance mowing efficiency, comfort, and durability. With a focus on performance and ease of use, these mowers are ideal for homeowners and landscaping professionals alike, ensuring a clean, precise cut season after season. Users can confidently choose Snapper for their outdoor power equipment needs, knowing they are backed by a brand renowned for innovation and quality.