Snapper RD Series, 2400 XL Series manual Ignition System

Page 7

SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tip- over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you can- not back up the slope or if you feel uneasy on it, do not operate on it.

Control of a walk-behind or ride-on machine sliding on a slope will not be regained by the application of the brake. The main reasons for loss of control are: insufficient tire grip on the ground, speed too fast, inadequate braking, the type of machine is unsuitable for its task, lack of awareness of the ground conditions, incorrect hitching and load distrib- ution.

1.Mow up and down slopes, not across.

2.Watch for holes, ruts, or bumps. Uneven terrain could overturn the unit. Tall grass can hide obstacles.

3.Choose a slow speed so that you will not have to stop or change speeds while on the slope.

4.Do not mow on wet grass. Tires may loose traction.

5.Always keep unit in gear especially when traveling down slopes. Do not shift to neutral and coast down- hill.

6.Avoid starting, stopping, or turning on a slope. If tires lose traction, disengage the blade(s) and proceed slowly straight down the slope.

7.Keep all movement on slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to rollover.

8.Use extra care while operating machines with grass catchers or other attachments; they can affect the stability of the unit. Do not use on steeps slopes.

9.Do not try to stabilize the machine by putting your foot on the ground (ride-on units).

10.Do not mow near drop-offs, ditches, or embank- ments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

11.Do not use grass catchers on steep slopes.

12.Do not mow slopes you cannot back up them.

13.See your authorized dealer/retailer for recommenda- tions of wheel weights or counterweights to improve stability.

14.Remove obstacles such as rocks, tree limbs, etc.

15.Use slow speed. Tires may lose traction on slopes even through the brakes are functioning properly.

16.Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

Safety Rules and Information

WARNING

Never operate on slopes greater than 17.6 percent (10°) which is a rise of 3-1/2 feet (106 cm) vertically in 20 feet (607 cm) horizontally.

When operating on slopes use additional wheel weights or counterweights. See your dealer/retailer to determine which weights are available and appropriate for your unit.

Select slow ground speed before driving onto slope. In addition to front weights, use extra caution when operating on slopes with rear-mounted grass catchers.

Mow UP and DOWN the slope, never across the face, use caution when changing directions and DO NOT START OR STOP ON SLOPE.

CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and the mowing activity. Never assume that children will remain where you last saw them.

1.Keep children out of the mowing area and under the watchful care of another responsible adult.

2.Be alert and turn unit off if children enter the area.

3.Before and during reverse operation, look behind and down for small children.

4.Never carry children, even with the blade(s) off. They may fall off and be seriously injured or interfere with safe unit operation. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine.

5.Never allow children to operate the unit.

6.Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

EMISSIONS

1.Engine exhaust from this product contains chemicals known, in certain quantities, to cause cancer, birth defects, or other reproductive harm.

2.Look for the relevant Emissions Durability Period and Air Index information on the engine emissions label.

TOWED EQUIPMENT (RIDE-ON UNITS)

1.Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.

2.Follow the manufacturer’s recommendations for weight limit for towed equipment and towing on slopes.

3.Never allow children or others in or on towed equip- ment.

4.On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

5.Travel slowly and allow extra distance to stop.

6.Do not shift to neutral and coast down hill.

IGNITION SYSTEM

1.This spark ignition system complies with Canadian ICES-002.

5

Image 7
Contents 20HP Hydro Tractors 18HP Hydro Tractors Mower DecksPage Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Safe Handling of Gasoline Service & MaintenanceCE Identification TAG Markings Identification NumbersCE Models Decal Transmission Release Decal Ignition Positions Safety DecalsSafety Decals Decal Cutting HeightOperational Safety Checks Safety IconsControl Functions Features & Controls Adding Fuel General Operating SafetyStopping the Tractor & Engine Operating the Tractor Emptying the Catcher Parking Brake FunctionStorage Attaching a TrailerRemoving the Mower Deck Mower Deck Removal InstallationMuffler and surrounding areas may be hot Installing the Mower Deck Catcher Removal InstallationInstall Mulch Plug Discharge Mulch Plug Installation & Removal Some ModelsPage Fall Before Every SpringCheck Tire Pressures Regular MaintenanceTransmission Maintenance Battery MaintenanceOil LubricationLubricate Rear Axle Shafts Service Interval YearlyCheck Mower Blade Timing Servicing the Mower Blades4x4 Wood Block SET Mower Belt Tension Safety Interlock System CheckPTO Clutch Adjustment Check Engine MaintenanceTroubleshooting, Adjustments, & Service Troubleshooting the Mower Seat Slide Adjustment Seat AdjustmentHopper Latch Adjustment Pitch AdjustmentNuts Steering Gear AdjustmentBrake Adjustment Adjustment NutBattery Charging Troubleshooting, Adjustment, & ServiceCATCHER-FULL Alarm Adjustment Mower Lift AdjustmentAdjust PTO Clutch Window Adjustment Nut Feeler Gauge PTO Clutch AdjustmentTransmission Release Lever Transmission PurgingCutting Height Adjustment Mower AdjustmentsLeveling The Mower Arbor Drive Belt Replacement PTO Belt ReplacementChassis DimensionsEngine TransmissionTechnical Manuals Replacement PartsMaintenance Items Optional AccessoriesPage O D U C T S

RD Series, 2400 XL Series specifications

The Snapper 2400 XL Series and RD Series represent the pinnacle of outdoor power equipment, embodying a perfect blend of performance, durability, and user-friendly design. Engineered for both residential and commercial applications, these models are specifically crafted to cater to a wide range of mowing needs.

The Snapper 2400 XL Series, known for its robust construction, features a powerful engine that delivers exceptional performance and reliability. With a cutting deck size that varies, users can choose options ranging from 21 inches to 30 inches, ensuring versatility for different yard sizes and conditions. This series utilizes a patented rear-engine design which provides superior visibility and maneuverability, making it ideal for navigating tight spots and landscaping around obstacles.

One of the standout technologies in the 2400 XL Series is the Instant Response Transmission. This system allows for smooth acceleration and responsive steering, which enhances user control. Additionally, the mowers are equipped with an adjustable cutting height feature, allowing for precision mowing to accommodate varying grass types and conditions.

Transitioning to the RD Series, it boasts a unique dual-blade system that enhances cutting efficiency. The dual blades create finer clippings, which decompose faster, resulting in healthier grass. The RD Series is designed with heavy-duty wheels and a reinforced steel frame, ensuring it can handle the rigors of challenging terrains while maintaining stability and control.

Both series highlight Snapper's commitment to comfort and user experience. Each model is ergonomically designed with comfortable grips and adjustable seating, reducing fatigue during extended mowing sessions. Moreover, the easy-start engine technology ensures that users can get to work without fuss, even in cold weather conditions.

Durability is a key characteristic of both the 2400 XL and RD Series. Constructed with high-quality materials, including corrosion-resistant surfaces, these mowers are built to withstand the elements and provide long-lasting performance. With exceptional warranty options, users can rest assured knowing their investment is protected.

In summary, the Snapper 2400 XL Series and RD Series incorporate advanced technologies and features designed to enhance mowing efficiency, comfort, and durability. With a focus on performance and ease of use, these mowers are ideal for homeowners and landscaping professionals alike, ensuring a clean, precise cut season after season. Users can confidently choose Snapper for their outdoor power equipment needs, knowing they are backed by a brand renowned for innovation and quality.