Telex TR-500/600C Example System Configurations, Single Base Station Audiocom Telex System

Page 28

Example System Configurations

Single Base Station Audiocom (Telex) System

The audio out RCA jack on the back of this unit is used for the public address system. The unused Audiocom channel must be terminated to avoid loud feedback if audio channel two was switched to by the beltpack.

The audio out of the base station’s RCA jack is the audio channel currently switched to at the BTR-500.

LOUD

SPEAKER

AUDIO CHANNEL 1 = RANGE INSTRUCTIONS AUDIO CHANNEL 2 = NOT USED

LOUD

SPEAKER

TARGET

AREA

SHOOTING

AREA

PA SYSTEM

1 CH

1 CH 1 CH 1 CH 1 CH 1 CH

SHOOTER'S WIRED BELTPACKS

Telex

RANGE DIRECTOR

	AUDIOCOM
	POWER SUPPLY
	TRANSMIT	BTR-500		RECEIVE
			FCC ID. B5DM503	ANT.
BTR-500	ANT.		MADE IN U.S.A.	ANT.
BTR-500			PATENT PENDING
	I/C 1	I/C 2	AUX

TELEX

LOAD

Figure 47

Example single BTR-500 Audiocom System used at a Shooting Range

-25-

Image 28

Contents Telex Table of Contents Customer Service Information FCC Information Introduction System FeaturesGeneral Description Base Station Transceiver Front Panel Controls and ConnectionsIntercom 1 and 2 Jacks Switch set to Telex Intercom 1 and 2 Jacks Switch set to RTSBase Station Controls and Connections Rear Panel BTR-600CBTR-500/600C Specifications Auxiliary JackBeltpack Headset Jack WiringControls and Connections Beltpack Specifications Initial Equipment Set-Up UnpackingAntenna Connection Quantity DescriptonAntenna Polarization Antenna PlacementDistance between Antennas Operating System Near Obstructions Distance Between base station BeltpackKeeping Site Clear to Antenna Antenna Placement Improving Reception and Increasing RangeRF Transmit/Receive Channel Switches Base Station Set-UpLocation Rack MountingIntercom Type Switch RF Transmit Mode SwitchDual Listen Switches Audio Channel Switch Telex IN/OUT SwitchAuxiliary to I/C Switch Program Audio Auxiliary SwitchAuxiliary to I/C Switch Interconnection to a Hard-Wired Intercom SystemConnecting Base Stations Together Example Interface to an Audiocom Telex Intercom System Intercom User Station US-2000A Program SpeakersIntercom Power Supply PS15 Example Interface to an RTS Intercom SystemAuxiliary Audio Connection Power ConnectionDummy Load Code Switch TR-600C Only Connecting HeadsetRF Channel Switches and RF Transmit Mode Beltpack Set-UpBattery Installation Battery InstallationPre-Walk-Thru Checklist Power Push-to-Talk/Lock-to-Talk SwitchLocal Headset Volume System OperationDual Listen Level Intercom LevelAuxiliary Level Sidetone LevelPower/Local Headset Volume Battery CheckBeltpack Operation Push-to-Talk/Lock-to-TalkMicrophone Gain Sidetone Level ControlExample System Configurations Single Base Station Audiocom Telex SystemCurtain Director RTS Power Supply Single Base Station RTS SystemSix Base Station RTS System Example of Six BTR-500 RTS Systems used by a Production UnitEight Base Station Telex System = Beltpack Position 1 *2 = Beltpack PositionSingle Beltpack to Single Beltpack System Beltpack to Beltpack SystemExample of a TR-500 System used at a Publishing Firm System Walk-Thru Troubleshooting Tech Tips Codes Settings and the BTR600CFrequency Interaction Battery Information Intercom Systems SpecificationsAccessories and Replacement Parts Customer Service Information FCC Information JAN Made in U.S.A