PRE-START Check List | Snapper 82354, 82355 specification

2.4PRE-START CHECK LIST (Continued)

3.Stand behind the mower. Using your left hand move the blade control down onto the handle and hold in place. See Figure 9.

FIGURE 9

4.Use your right hand to pull the rope start T-handle until the engine starts. Guide rope slowly back to rope guide to prevent rope breakage. Breakage could result if the rope handle is allowed to snap back.

5.NOTE: Blade control must be held in place on the handle for engine to continue operating. Releasing blade control will stop the engine. Allow the engine to warm up until engine runs smoothly.

CAUTION

The 120 volt electric start models are supplied with a 10 foot three-wire power cord. The plug is designed to operate on 120 volt AC household current. It must be properly grounded at all times to avoid the possibility of electric shock which may cause injury to the operator. Follow all instructions carefully as set forth below. Determine that your house wiring system is a three-wire grounded system. Ask a licensed electrician if you are not sure. If your house wiring system is not a three-wire grounded system, do not use this electric start mower under any condition. If your system is grounded and a three- hole receptacle is not available, one should be installed by a licensed electrician.

2.4.2.If using a power cord other than the one supplied with mower then use a power cord that is heavy enough to carry the correct amount of current to the mower. See chart for correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge cord.

OPTIONAL POWER CORDS

MINIMUM GAUGE FOR CORD SETS

120 Volt		Total Length of Cord in Feet
Rating - Amps		25 ft.	50 ft.	100 ft.	150 ft.
More	Not More		A.W.G.
Than	Than		A.W.G.
0	6	18	16	16	14
6	10	18	16	14	12
10	12	16	16	14	12
12	16	14	12	Not Recommended

2.4.3. 120 VOLT ELECTRIC START EQUIPPED MODELS

1.Move the throttle lever, which is located on the engine, to the rabbit or fast position. Refer to Figure 7.

NOTE: Do not use primer when using the electric starter. Do not use primer to restart a warm engine after a short shutdown.

2.Connect power cord to the handle mounted switch box. See Figure 10.

FIGURE 10

3.Plug other end of power cord into a three hole grounded 120 volt, AC receptacle.

82354, 82355 specifications

Snapper 82354 and 82355 are two highly regarded lawn mowers known for their efficiency, durability, and innovative features. These models are particularly appreciated by homeowners and professionals alike for their ability to tackle various grass lengths and terrains with ease.

The Snapper 82354 is powered by a reliable 223cc engine, which provides ample power for mowing even the thickest grass. It features a self-propelled drive system, making it easy to navigate different inclines and challenging landscapes. One of the standout features of the 82354 is its 21-inch steel mowing deck, designed to provide a clean and even cut. This durable deck material ensures longevity while maintaining the mower’s performance over time.

In addition to its robust design, the Snapper 82354 offers multiple cutting height positions, allowing users to adjust the grass height from 1.25 inches to 4 inches. This versatility is crucial for adapting to changing seasons and grass types, ensuring a well-manicured lawn year-round. The mower also includes a convenient rear bagging system for easy grass collection, as well as a mulching capability, allowing clippings to be finely chopped and returned to the lawn for natural fertilization.

Similarly, the Snapper 82355 shares many of the same features but comes with a few enhancements. This model is equipped with a more powerful engine and an improved transmission system, enhancing its speed and maneuverability. The 82355 also boasts an upgraded 22-inch deck for a wider cutting path, making lawn maintenance quicker and more efficient.

Both models incorporate advanced technologies such as the ReadyStart starting system, which eliminates the need for priming or choking, making them user-friendly and hassle-free. Furthermore, Snapper’s commitment to environmental responsibility is evident in these designs, as they meet modern emissions regulations and operate more quietly than older models.

In summary, the Snapper 82354 and 82355 lawn mowers are excellent choices for anyone seeking reliability and performance. With their powerful engines, durable construction, versatile cutting options, and advanced features, these models are tailored to meet the needs of both residential and professional users alike, ensuring a pristine lawn with minimal effort. Whether you choose the 82354 or the upgraded 82355, you're guaranteed a high-quality lawn care experience.