Snapper 82354, 82355 Handle Height Adjustment, Recycling Cover REMOVAL/INSTALLATION

Page 9

2.6 HANDLE HEIGHT ADJUSTMENT

NOTE: A 1/2” wrench will be needed to adjust handle height.

1.The height of the handle can be adjusted by loosening the four nuts located on the lower handle brackets and pivoting the handle up or down. Tighten all nuts securely. This provides 2 inches of adjustment. See Figure 14.

FIGURE 14

2.7RECYCLING COVER REMOVAL/INSTALLATION

1.The recycling cover is fastened in place using two knobs. To remove the cover simply unscrew the two knobs and lift off the cover. See Figure 15. Note: When reinstalling the cover, the deck side wall should fit between the tab and outside of cover. Tighten knobs securely. See Figure 16.

FIGURE 15

FIGURE 16

CAUTION

DO NOT operate mower without side chute, recycling cover or adapter with grass bag in place.

2.8SIDE DISCHARGE CHUTE REMOVAL/INSTALLATION

1.The side chute is fastened in place using the same two knobs used to secure the recycling cover. There is also a carriage bolt and nut (Found in hardware bag) that secures the lower rear portion of chute. Use this bolt and nut on the side chute only. Tighten all bolts, nuts, knobs securely. See Figure 15 & Figure 16.

2.9RECYCLING MOWER OPERATION

Use the following steps for the best results when recycling.

1.Set the cutting height in the highest blade setting. Refer to Section 2.5 CUTTING HEIGHT ADJUSTMENT

2.Mow with the engine throttle lever set at the fastest speed setting.

3.Push the mower at a slow ground speed to allow fine chopping of the clippings or leaves. NOTE: The grass must be dry. If the grass is extremely dense, set the rear height adjusters one notch lower than the front adjusters to lower the rear of the deck. Experiment with the deck settings to achieve best recycling.

Image 9
Contents Model Identification Lady GardenTMMaintenance and Storage Important Safety InstructionsProtection for Children PreparationFamiliarization AccessoriesIntroduction NomenclatureSET UP Instructions SET UP Instructions Before Operating Operating InstructionsStarting Engine StoppingOptional Power Cords Minimum Gauge for Cord Sets PRE-START Check ListVolt Electric Start Equipped Models Adjusting Axles Cutting Height AdjustmentHandle Height Adjustment Recycling Cover REMOVAL/INSTALLATIONRecycling Mower Operation Cutting Blade Service Service ProceduresLubrication First 5 Hours NEW UnitStorage Procedure Cutting Blade ServiceManual No

82354, 82355 specifications

Snapper 82354 and 82355 are two highly regarded lawn mowers known for their efficiency, durability, and innovative features. These models are particularly appreciated by homeowners and professionals alike for their ability to tackle various grass lengths and terrains with ease.

The Snapper 82354 is powered by a reliable 223cc engine, which provides ample power for mowing even the thickest grass. It features a self-propelled drive system, making it easy to navigate different inclines and challenging landscapes. One of the standout features of the 82354 is its 21-inch steel mowing deck, designed to provide a clean and even cut. This durable deck material ensures longevity while maintaining the mower’s performance over time.

In addition to its robust design, the Snapper 82354 offers multiple cutting height positions, allowing users to adjust the grass height from 1.25 inches to 4 inches. This versatility is crucial for adapting to changing seasons and grass types, ensuring a well-manicured lawn year-round. The mower also includes a convenient rear bagging system for easy grass collection, as well as a mulching capability, allowing clippings to be finely chopped and returned to the lawn for natural fertilization.

Similarly, the Snapper 82355 shares many of the same features but comes with a few enhancements. This model is equipped with a more powerful engine and an improved transmission system, enhancing its speed and maneuverability. The 82355 also boasts an upgraded 22-inch deck for a wider cutting path, making lawn maintenance quicker and more efficient.

Both models incorporate advanced technologies such as the ReadyStart starting system, which eliminates the need for priming or choking, making them user-friendly and hassle-free. Furthermore, Snapper’s commitment to environmental responsibility is evident in these designs, as they meet modern emissions regulations and operate more quietly than older models.

In summary, the Snapper 82354 and 82355 lawn mowers are excellent choices for anyone seeking reliability and performance. With their powerful engines, durable construction, versatile cutting options, and advanced features, these models are tailored to meet the needs of both residential and professional users alike, ensuring a pristine lawn with minimal effort. Whether you choose the 82354 or the upgraded 82355, you're guaranteed a high-quality lawn care experience.