Cutting Blade Service, Storage Procedure

3.1.2.CUTTING BLADE SERVICE (Continued)

Sharpen Blade when the cutting edges become dull if the blade is in otherwise good condition. When dull, the grass cut ends will be ragged and usually turn brown soon after mowing.

CAUTION

The cutting blade has sharp edges which can cause severe injury. Always wear heavy leather gloves when handling blade to prevent injury.

1.Remove the blade by removing the capscrew that secures it to blade hub. Refer to Figure 20.

2.Sharpen it on a grinding wheel at an angle of 22 to 28 degrees. The cutting surface should extend in about 7-1/2 inches from the tips. See Figure 19.

3.Check the blade after sharpening to determine that it is still balanced. It will cause excessive vibration if unbalanced.

FIGURE 19

4.Reinstall sharpened blade and related components as shown in Figure 20.

FIGURE 20

5.Tighten the special blade retaining cap screw to 25 to 35 foot-pounds torque.

4.1STORAGE PROCEDURE

Refer to the Engine Manual for directions regarding engine storage preparations. Prepare the mower for “end of season” storage as follows:

CAUTION

Use approved fuel container. DO NOT smoke near open fuel container. DO NOT fill fuel tank indoors or when engine is running. Wipe off any spilled fuel before starting engine. Disconnect spark plug wire from spark plug. Secure wire away from plug.

1.Remove fuel from fuel tank. Run engine until carburetor bowl is empty.

2.Tape all openings closed to prevent spraying water into exhaust or air intakes during washing.

3.Stand the mower on its rear wheels and thoroughly clean the underside of the deck. Scrape away any accumulation of grass with a putty knife and/or wire brush, then use a hose to wash down the underside of deck and allow to dry.

4.Lubricate all exposed metal with a light coating of oil to prevent corrosion.

5.Drain oil and refill with new oil.

6.Change air filter. Refer to the Engine Owners Manual Air Cleaner D section.

7.Store the mower in a shed or other dry area, protected from weather.

NOTE: Handles may be folded for storage. To fold handles, loosen two T-Knobs, and fold the handle over the mower. Use care not to “kink” the Blade Control Cable or the 110 volt power cable.

82354, 82355 specifications

Snapper 82354 and 82355 are two highly regarded lawn mowers known for their efficiency, durability, and innovative features. These models are particularly appreciated by homeowners and professionals alike for their ability to tackle various grass lengths and terrains with ease.

The Snapper 82354 is powered by a reliable 223cc engine, which provides ample power for mowing even the thickest grass. It features a self-propelled drive system, making it easy to navigate different inclines and challenging landscapes. One of the standout features of the 82354 is its 21-inch steel mowing deck, designed to provide a clean and even cut. This durable deck material ensures longevity while maintaining the mower’s performance over time.

In addition to its robust design, the Snapper 82354 offers multiple cutting height positions, allowing users to adjust the grass height from 1.25 inches to 4 inches. This versatility is crucial for adapting to changing seasons and grass types, ensuring a well-manicured lawn year-round. The mower also includes a convenient rear bagging system for easy grass collection, as well as a mulching capability, allowing clippings to be finely chopped and returned to the lawn for natural fertilization.

Similarly, the Snapper 82355 shares many of the same features but comes with a few enhancements. This model is equipped with a more powerful engine and an improved transmission system, enhancing its speed and maneuverability. The 82355 also boasts an upgraded 22-inch deck for a wider cutting path, making lawn maintenance quicker and more efficient.

Both models incorporate advanced technologies such as the ReadyStart starting system, which eliminates the need for priming or choking, making them user-friendly and hassle-free. Furthermore, Snapper’s commitment to environmental responsibility is evident in these designs, as they meet modern emissions regulations and operate more quietly than older models.

In summary, the Snapper 82354 and 82355 lawn mowers are excellent choices for anyone seeking reliability and performance. With their powerful engines, durable construction, versatile cutting options, and advanced features, these models are tailored to meet the needs of both residential and professional users alike, ensuring a pristine lawn with minimal effort. Whether you choose the 82354 or the upgraded 82355, you're guaranteed a high-quality lawn care experience.