Samsung SLM2875FDXAA manual Setup using Macintosh, Procedure

Wireless network setup

9When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click Next.

	If the Change PC Network Setting window appears, follow the steps in the
	window.
	Click Next if you are finished with the computer’s wireless network settings.
	If you set the computer’s wireless network on DHCP, it will take several
	minutes to receive the IP address.
10	The Wireless Network Setting Complete window appears.
	Select Yes if you accept the current settings and continue the setup
	procedure.
	Select No if you want to return to the beginning screen.
	Then, click Next.
11	Click Next when the Confirm Printer Connection window appears.
12	Select the components to be installed. Click Next.
	After selecting the components, you can also change the machine name,
	set the machine to be shared on the network, set the machine as the
	default machine, and change the port name of each machine. Click Next.
13	After the installation is finished, a window asking you to print a test page
	appears. If you want to print a test page, click Print a test page.

Otherwise, just click Next and go to step 15.

14	If the test page prints out correctly, click Yes.
	If not, click No to reprint it.
15	To register as a user of the machine in order to receive information from
	Samsung, click On-line Registration.
16	Click Finish.

Setup using Macintosh

Items to prepare

•Access point

•Network-connected computer

•Software CD that was provided with your machine

•The machine installed with a wireless network interface

•USB cable

Access point via USB cable

1Check whether the USB cable is connected to the machine.

2Turn on your computer, access point, and machine.

2. Using a Network-Connected Machine 165