Samsung SLM2875FDXAA manual Auto Continue, Altitude altitude Adjustment Description Auto CR

System setup

Item	Description
	Sets the length of time the printer waits before printing
Job Timeout	the last page of a print job that does not end with a
	command to print the page.
	You can set the condition to wake up from power-save
	mode. Set the item on.
	• Button Press: When you press any button except
	power button, the machine wake up from the power
Wakeup Event	save mode.
	• Scanner: When you insert paper in the document
	feeder, the machine wake up from the power save
	mode.
	• Printer: When you open or close the scan unit, the
	machine wake up from the power save mode.
	Determine whether or not the machine continues
	printing when it detects the paper does not match the
	paper settings.
Auto Continue	• Off: If a paper mismatch occurs, the machine waits
	until you insert the correct paper.

•On: If a paper mismatch occurs, an error message will display. The machine waits for about 30 second, then automatically clear the message and continue printing.

•Altitude Adj. Optimize print quality according to the machine’s

•Altitude altitude.

Adjustment

	Item	Description
Auto CR		Allows you to append the required carriage return to
		each line feed, which is useful for Unix or DOS users.
Firmware Version		Shows the product’s firmware version.
		Provides suggestions while you type an email address or
AutoComplete		fax number. This enables you to find and select the data
		without typing it in completely.
•	Tray Chaining	Determine whether or not the machine continues
•	Auto Tray Switch	printing when it detects the paper does not match. For
		example, if both tray 1 and tray 2 are filled with the same
		size paper, the machine automatically prints from tray 2
		after the tray 1 runs out of paper.
		This option does not appear if you selected Auto
		for Paper Source from printer driver.
		Automatically substitutes the printer driver’s paper size
		to prevent the paper mismatch between Letter and A4.
Paper Substitution		For example, if you have A4 paper in the tray but you set
		the paper size to Letter in the printer driver, the machine
		prints on A4 paper and vice versa.
		Determine whether to disregard the paper mismatch
Paper Mismatch		error or not. Select Off, then the machine does not stop
		printing even if the paper mismatches.

3. Useful Setting Menus 193