Samsung SLM2875FDXAA manual ID card copying, Press ID Copy on the control panel

Basic copying

To select from the predefined copy sizes

1Select (copy) > (Menu) > Copy Feature > Reduce/Enlarge on the control panel.

2Select the option you want and press OK.

3Press (Stop/Clear) to return to ready mode.

To scale the copy by directly entering the scale rate

1Select (copy) > (Menu) > Copy Feature > Reduce/Enlarge > Custom on the control panel.

2Enter the copy size you want using the numeric keypad.

3Press OK to save the selection.

4Press (Stop/Clear) to return to ready mode.

When you make a reduced copy, black lines may appear at the bottom of your copy.

The machine prints one side of the original on the upper half of the paper and the other side on the lower half without reducing the size of the original. This feature is helpful for copying a small-sized item such as business card.

• The original must be placed on the scanner glass to use this feature.

•If the machine set to Eco mode, this feature is not available.

•For better image quality, Select (copy) > (Menu) > Copy Feature > Original Type > Photo on the control panel.

1Press ID Copy on the control panel.

2Place the front side of an original facing down on the scanner glass where arrows indicate as shown. Then, close the scanner lid.

ID card copying

3 Place Front Side and Press [Start] appears on the display.

Your machine can print 2-sided originals on one sheet.

2. Menu overview and basic setup 63