Samsung SLM2875FDXAA manual Resolution, Press Stop/Clear to return to ready mode

Basic faxing

Resolution

The default document settings produce good results when using typical text- based originals. However, if you send originals that are of poor quality, or contain photographs, you can adjust the resolution to produce a higher quality fax.

1Select (fax) > (Menu) > Fax Feature > Resolution on the control panel.

2Select the option you want and press OK.

•Standard: Originals with normal sized characters.

•Fine: Originals containing small characters or thin lines or originals printed using a dot-matrix printer.

•Super Fine: Originals containing extremely fine detail. Super Fine mode is enabled only if the machine with which you are communicating also supports the Super Fine resolution.

• For memory transmission, Super Fine mode is not available. The resolution setting is automatically changed to Fine.

•When your machine is set to Super Fine resolution and the fax machine with which you are communicating does not support Super Fine resolution, the machine transmits using the highest resolution mode supported by the other fax machine.

•Photo Fax: Originals containing shades of gray or photographs.

•Color Fax: Original with colors.

• Memory transmission is not available in this mode.

•You can only send a color fax if the machine you are communicating with supports color fax reception and you send the fax manually.

3Press (Stop/Clear) to return to ready mode.

Darkness

You can select the degree of darkness of the original document.

The darkness setting is applied to the current fax job. To change the default setting (see "Fax menu" on page 186).

1Select (fax) > (Menu) > Fax Feature > Darkness on the control panel.

2Select a darkness level you want.

3Press (Stop/Clear) to return to ready mode.

2. Menu overview and basic setup 69