Samsung SLM2875FDXAA Basic scanning, Basic Scanning, Switch to advanced mode Scan to PC Settings

Basic scanning

For special scanning features, refer to the Advanced Guide (see "Scan features" on page 230).

If you see Not Available message, check the port connection, or select Enable Scan from Device Panel in Samsung Easy Printer Manager >

Switch to advanced mode > Scan to PC Settings.

Basic Scanning

This is the normal and usual procedure for scanning originals.

This is a basic scanning method for USB-connected machine.

• It may be necessary to press OK to navigate to lower-level menus for some models.

•if you want to scan using the network, refer to the Advanced Guide (see "Scanning from network connected machine" on page 238).

1 Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on

page 52).

2Select (scan) > Scan to PC > Local PC on the control panel.

3Select the application program you want and press OK. Default setting is My Documents.

You can add or delete the folder where the scanned file is saved in

Samsung Easy Printer Manager > Switch to advanced mode. > Scan to PC Settings.

4Select the option you want and press OK.

5Scanning begins.

Scanned image is saved in computer’s C:\Users\users name\My

•Documents. The saved folder may differ, depending on your operating system or the application you are using.

2. Menu overview and basic setup 65