Samsung SLM2875FDXAA manual Ad hoc via USB cable, Wireless Network Setting Complete window appears

Select Yes if you accept the current settings and continue the setup procedure.

Select No if you want to return to the beginning screen. Then, click Next.

Wireless network setup

10 The Wireless Network Setting Complete window appears. Ad hoc via USB cable

11	Click Next when the Confirm Printer Connection window appears.
12	Select the components to be installed. Click Next.
13	After selecting the components, you can also change the machine name,
	set the machine to be shared on the network, set the machine as the
	default machine, and change the port name of each machine. Click Next.
14	After the installation is finished, a window asking you to print a test page
	appears. If you want to print a test page, click Print a test page.
	Otherwise, just click Next and go to step 16.
15	If the test page prints out correctly, click Yes.
	If not, click No to reprint it.
16	To register as a user of the machine in order to receive information from
	Samsung, click On-line Registration.
17	Click Finish.

If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad-hoc wireless network by following the simple steps below.

Items to prepare

•Network-connected computer

•Software CD that was provided with your machine

•The machine installed with a wireless network interface

•USB cable

Creating the ad hoc network in Windows

1Check whether the USB cable is connected to the machine.

2Turn on your computer and the wireless network machine.

3Insert the supplied software CD into your CD-ROM drive. Click Start > All programs > Accessories > Run.

Type X:\Setup.exe replacing “X” with the letter, which represents your CD-ROM drive and click OK.

2. Using a Network-Connected Machine 162