Samsung SLM2875FDXAA manual From the computer, Items to prepare, Choosing your type

Models: SLM2875FDXAA

1 317
Download 317 pages 17.86 Kb
Page 154
Image 154

Wireless network setup

From the computer

From the computer, we recommend using a USB cable with the program provided in the supplied software CD

See "Setup using Windows" on page 159.

See "Setup using Macintosh" on page 165.

With a USB cable: You can simply set up a wireless network using the program on the supplied software CD. Only Windows and Macintosh operating systems are supported (see "Setup using Windows" on page 159 or "Setup using Macintosh" on page 165).

You can also install a wireless network in Printer Settings Utility with a USB cable after installing the driver (Windows and Macintosh operating systems are supported).

With a network cable: You can set up a wireless network using the SyncThru™ Web Service program (see "Using a network cable" on page 170).

Using the WPS button

If your machine and an access point (or wireless router) support Wi-Fi Protected Setup™ (WPS), you can easily configure the wireless network settings by

pressing the (WPS) button on the control panel without a computer.

If you want to use the wireless network using the infrastructure mode, make sure that the network cable is disconnected from the machine. Using the

WPS (PBC) button or entering the PIN from the computer to connect to the access point (or wireless router) varies depending on the access point (or wireless router) you are using. Refer to the user's guide of the access point (or wireless router) you are using.

Items to prepare

Check if the access point (or wireless router) supports Wi-Fi Protected Setup™ (WPS).

Check if your machine supports Wi-Fi Protected Setup™ (WPS).

Networked computer (PIN mode only)

Choosing your type

There are two methods available to connect your machine to a wireless network

using the (WPS) button on the control panel.

The Push Button Configuration (PBC) method allows you to connect your

machine to a wireless network by pressing both the (WPS) button on the control panel of your machine and the WPS (PBC) button on a Wi-Fi Protected Setup™ (WPS)-enabled access point (or wireless router) respectively.

2. Using a Network-Connected Machine 154

Page 154
Image 154
Samsung SLM2875FDXAA manual From the computer, Items to prepare, Choosing your type, Using the WPS button