Snapper 82354, 82355 important safety instructions SET UP Instructions

Page 4

SET UP INSTRUCTIONS

Thank you for purchasing a Lady Garden walk behind lawn mower. With proper care and servicing this product will give you many years of service. This product is completely assembled and requires just a few minutes of your time to prepare it for operation. Please perform the following steps.

1.Open the carton by pulling on one of the two pull tabs located toward the bottom of the carton. Pull tab all the way around the carton.

2.Lift the top portion of the carton over the mower.

1)Remove the four corner posts. 2) Remove protective wrapping on the bail. Remove cardboard from between the handle and lower brackets.

3.Remove the container of oil located in the carton inner pack at the rear of the mower.

4.Lift the cardboard tab from between the deck and trailing shield.

5.Loosen the handle T-knobs and raise the handle to the operating position. Retighten the T-knobs. See Figure 2.

FIGURE 2

6.Move all four wheels to the highest height of cut (See Section 2.5 - CUTTING HEIGHT ADJUST-MENT SECTION)

7.Using the handle push the unit out of the carton lower section.

CAUTION

The cutting blade has sharp edges which can cause severe injury. Always wear heavy leather gloves when handling blade to prevent injury.

8.With the aid of another person tip the mower back until the handle touches the ground. Hold in that position and carefully remove the foam block under the deck. Return the mower to the upright position.

9.Pull the bail down to the handle, grasp the recoil T- handle located at the engine recoil, and pull the rope back and route it thru the rope guide located at the right hand side of the handle. See Figure 3.

FIGURE 3

10.Remove the oil fill dipstick See Figure 4.

FIGURE 4

Image 4
Contents Lady GardenTM Model IdentificationImportant Safety Instructions Maintenance and StorageProtection for Children PreparationAccessories FamiliarizationIntroduction NomenclatureSET UP Instructions SET UP Instructions Operating Instructions Before OperatingStarting Engine StoppingPRE-START Check List Optional Power Cords Minimum Gauge for Cord SetsVolt Electric Start Equipped Models Cutting Height Adjustment Adjusting AxlesRecycling Cover REMOVAL/INSTALLATION Handle Height AdjustmentRecycling Mower Operation Service Procedures Cutting Blade ServiceLubrication First 5 Hours NEW UnitCutting Blade Service Storage ProcedureManual No

82354, 82355 specifications

Snapper 82354 and 82355 are two highly regarded lawn mowers known for their efficiency, durability, and innovative features. These models are particularly appreciated by homeowners and professionals alike for their ability to tackle various grass lengths and terrains with ease.

The Snapper 82354 is powered by a reliable 223cc engine, which provides ample power for mowing even the thickest grass. It features a self-propelled drive system, making it easy to navigate different inclines and challenging landscapes. One of the standout features of the 82354 is its 21-inch steel mowing deck, designed to provide a clean and even cut. This durable deck material ensures longevity while maintaining the mower’s performance over time.

In addition to its robust design, the Snapper 82354 offers multiple cutting height positions, allowing users to adjust the grass height from 1.25 inches to 4 inches. This versatility is crucial for adapting to changing seasons and grass types, ensuring a well-manicured lawn year-round. The mower also includes a convenient rear bagging system for easy grass collection, as well as a mulching capability, allowing clippings to be finely chopped and returned to the lawn for natural fertilization.

Similarly, the Snapper 82355 shares many of the same features but comes with a few enhancements. This model is equipped with a more powerful engine and an improved transmission system, enhancing its speed and maneuverability. The 82355 also boasts an upgraded 22-inch deck for a wider cutting path, making lawn maintenance quicker and more efficient.

Both models incorporate advanced technologies such as the ReadyStart starting system, which eliminates the need for priming or choking, making them user-friendly and hassle-free. Furthermore, Snapper’s commitment to environmental responsibility is evident in these designs, as they meet modern emissions regulations and operate more quietly than older models.

In summary, the Snapper 82354 and 82355 lawn mowers are excellent choices for anyone seeking reliability and performance. With their powerful engines, durable construction, versatile cutting options, and advanced features, these models are tailored to meet the needs of both residential and professional users alike, ensuring a pristine lawn with minimal effort. Whether you choose the 82354 or the upgraded 82355, you're guaranteed a high-quality lawn care experience.