Snapper LT145H33GBV, LT145H38GBV, LT150H38GKV important safety instructions Operation

Page 3

IMPORTANT SAFETY INSTRUCTIONS

PREPARATION

(Continued From Previous Page)

7.Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP machine if anyone enters the area.

8.Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.

9.Make sure all safety decals are clearly legible. Replace if damaged.

10.Protect yourself when mowing and wear safety glasses, long pants and substantial footwear.

11.Know how to STOP blades and engine quickly in preparation for emergencies.

12.Use extra care when loading or unloading the machine into a trailer or truck.

13.Check grass catcher components frequently for signs of wear or deterioration and replace as needed to prevent injury from thrown objects going through weak or worn spots.

OPERATION

1.Mount and dismount machine from left side.

2.Start engine from operator's seat, if possible. Make sure blades are OFF and parking brake is set.

3.DO NOT leave machine with engine running. STOP engine, STOP blades, SET brake, and Remove key before leaving operators position of any reason.

4.DO NOT operate machine unless properly seated with feet on feet rests or pedal(s).

5.STOP BLADES and ENGINE and make sure blades have stopped before removing grass catcher or unclogging mower to prevent loss of fingers or hand.

6.Blades must be OFF except when cutting grass. Set blades in highest position when mowing over rough ground.

7.Keep hands and feet away from rotating blades underneath deck. DO NOT place foot on ground while BLADES are ON or machine is in motion.

8.DO NOT operate machine without entire grass catcher or guards in place. DO NOT point discharge at people, passing cars, windows or doors.

9.Slow down before turning.

10.Watch out for traffic when near or crossing roadways.

11.STOP engine immediately after striking an obstruction. Inspect machine and repair damage before resuming operation.

12.Operate machine only in daylight or with good artificial light.

13.Move joystick (if equipped) SLOWLY to maintain control during speed and directional changes.

OPERATION

(Continued From Previous Column)

14.Exercise CAUTION when pulling loads. Limit loads to those you can safely control and attach loads to hitch plate as specified with SNAPPER attachment instructions.

15.DO NOT operate engine in enclosed areas. Engine exhaust gases contain carbon monoxide, a deadly poison.

MAINTENANCE

1.DO NOT store machine or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of the reach of children in a well ventilated, unoccupied building.

2.Keep engine free of grass, leaves or excess grease to reduce fire hazard and engine overheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4.Check brakes frequently; adjust, repair or replace as needed.

5.Keep all bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

6.Always provide adequate ventilation when running engine. Exhaust gases contain carbon monoxide, an odorless and deadly poison.

7.Disconnect negative (black) cable from battery before performing maintenance or service. Cranking engine could cause injury.

8.DO NOT work under machine without safety blocks.

9.Service engine and make adjustments only when engine is stopped. Remove spark plug wire(s) from spark plug(s) and secure wire(s) away from spark plug(s).

10.DO NOT change engine governor speed settings or overspeed engine.

11.Lubricate machine at intervals specified in manual to prevent controls from binding.

12.Mower blades are sharp and can cut. Wrap the blades or wear heavy leather gloves and use CAUTION when handling them.

13.DO NOT test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exiting engine.

14.Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices.

15.Use only genuine SNAPPER replacement parts to assure that original standards are maintained.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model Number Explanation Lawn Tractor Hydrostatic Drive Series GImportant Safety Instructions Operation Table of Contents Controls ComponentsOPERATOR’S Seat Adjustment Front to Rear Adjustment PRE-START ChecklistOFF Starting & Operation Starting EngineStarting & Operation 2.3.2. Starting Wheel Drive Starting Mower BladeStopping Wheel Drive Releasing Park Brake Setting Park BrakeCutting Height Adjustment Stopping Stopping Mower BladeRolling Tractor with Engine OFF 2.6.1. Rolling Hydro Models Reverse Lockout Mechanism Override Reverse Lockout MechanismCheck Blade Brake Service After First 5 HoursIntroduction Change Engine OILCheck 38 Deck Drive Belt Service Every 25 Operating HoursCheck Engine Check 33 Deck Drive BeltTractor Lubrication Fuel Filter Service AnnuallyService Annually 3.4.2. Fuel Filter From PreviousSpark Plug Hydrostatic Transmission OIL Engine Adjustments & Repair Blade Brake AdjustmentDeck Blade Brake Adjustment Blade Belt Adjustment 33 Deck Blade Belt Adjustment 38 DeckOn next Side View of Deck Adjusting Mower Blade 33 Deck from previousDeck Level Adjustment Side to Side Deck Level Adjustment Front to Rear Sector PlatesDeck Level Adjustment Front to Rear Front Lift ROD Front of Tractor Deck Level Adjustment Front to Rear Tractor Drive Components 4.3.1. Brake AdjustmentRear to Front View of Deck Shifter Adjustment Steering AdjustmentMounting Ninja Blade Sharpening Mower Blade Service Standard Blade Wear LimitsNinja Blade Wear Limits Standard Blade SharpeningTraction Drive Belt Replacement Mower Deck Removal Mower Blade ReplacementTraction drive belt removal View from Underneath Tractor Traction drive belt replacementDeck Drive Belt Battery Storage Battery Battery RemovalBattery Installation Battery ServiceNEW Battery Preparation Battery TestingAvailable Accessories Schematic Wiring Harness P.N Schematic Wiring Harness P.N LT15OHGKVLT145H33GBV & LT145H38 GBV Troubleshooting Guide Troubleshooting Guide LT145H38GBV Tractor Drive Belts Mower BladesNinja LT145H33GBVYear Limited Warranty Primary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Service Notes Service Notes Lawn Tractor Hydrostatic Drive Series G

LT145H33GBV, LT145H33GBV, LT145H38GBV, LT150H38GKV specifications

The Snapper LT145H33GBV, LT145H38GBV, LT150H38GKV, and LT145H33GBV represent a series of innovative lawn tractors designed for efficiency, comfort, and durability. These models are tailored for homeowners seeking an effective solution for lawn care, offering a blend of performance and features that set them apart from traditional lawn mowing equipment.

One prominent feature of these tractors is their powerful engines. The LT145H33GBV and LT145H38GBV are equipped with 14.5 HP engines, while the LT150H38GKV sports a more robust 15 HP engine, allowing for higher performance and more demanding tasks. These engines are designed for reliability and longevity, ensuring they can handle various terrains with ease.

Each model is designed with user comfort in mind. The seats are ergonomically designed for prolonged use, featuring adjustable settings to ensure a personalized fit. Additionally, the tractors have easy-to-reach controls, a smooth steering mechanism, and ample legroom, making the mowing experience more enjoyable.

The cutting systems of these Snapper models are notable for their versatility. With a wide cutting deck size of up to 42 inches in the LT145H33GBV and LT145H38GBV, and a slightly larger 50-inch option in the LT150H38GKV, they provide the capability to mow larger areas efficiently. The adjustable cutting heights allow users to customize their lawns' appearance, ensuring the right height for various grass types and conditions. Furthermore, the deck is designed for easy cleaning and maintenance, which prolongs the life of the equipment.

Another key characteristic of these lawn tractors is their innovative technologies. Many models feature Snapper's patented rear-engine design, which enhances visibility and maneuverability. This design reduces the turning radius, allowing for easy navigation around flower beds, trees, and other obstacles in the yard.

Fuel efficiency is a critical factor, and these tractors do not disappoint. They are engineered to optimize fuel consumption while delivering high performance, ensuring that users can maximize their mowing time without frequent refueling.

Safety remains a priority in the design of Snapper lawn tractors. Each model is equipped with safety features such as a seat belt and a safety switch that automatically shuts off the engine if the operator leaves the seat, preventing accidents.

In summary, the Snapper LT145H33GBV, LT145H38GBV, LT150H38GKV, and LT145H33GBV are designed to deliver exceptional performance paired with user comfort and safety. With powerful engines, versatile cutting systems, and innovative features, these tractors are solid choices for homeowners looking to maintain their lawns effortlessly and effectively.
Top Page Image Contents