Snapper 13HP manual Starting After Long Term Storage, Temporary Storage 30 Days Or Less

Page 13

Operation

STORAGE

Temporary Storage (30 Days Or Less)

Remember, the fuel tank will still contain some gasoline, so never store the unit indoors or in any other area where fuel vapor could travel to any ignition source. Fuel vapor is also toxic if inhaled, so never store the unit in any structure used for human or animal habitation.

Here is a checklist of things to do when storing your unit temporarily or in between uses:

Keep the unit in an area away from where children may come into contact with it. If there’s any chance of unauthorized use, remove the spark plug (s) and put in a safe place. Be sure the spark plug opening is protected from foreign objects with a suitable cover.

If the unit can’t be stored on a reasonable level surface, chock the wheels.

Clean all grass and dirt from the mower.

Long Term Storage (Longer Than 30 Days)

Before you store your unit for the off-season, read the Maintenance and Storage instructions in the Safety Rules section, then perform the following steps:

Drain crankcase oil while engine is hot and refill with a grade of oil that will be required when unit is used again.

Prepare the mower deck for storage as follows:

a.Clean underside of mower deck.

b.Coat all bare metal surfaces with paint or light coat of oil to prevent rusting.

Clean external surfaces and engine.

Prepare engine for storage. See engine owner’s manual.

Clean any dirt or grass from cylinder head cooling fins, engine housing and air cleaner element.

Cover air cleaner and exhaust outlet tightly with plastic or other waterproof material to keep out moisture, dirt and insects.

Completely grease and oil unit as outlined in the Normal Care section.

Clean up unit and apply paint or rust preventative to any areas where paint is chipped or damaged.

WARNING

Never store the unit, with gasoline in engine or fuel tank, in a heated shelter or in enclosed, poorly ventilated enclosures. Gasoline fumes may reach an open flame, spark or pilot light (such as a furnace, water heater, clothes dryer, etc.) and cause an explosion.

Handle gasoline carefully. It is highly flammable and careless use could result in serious fire damage to your person or property.

Drain fuel into an approved container outdoors away from open flame or sparks.

Drain fuel system completely or add a gasoline stabilizer to the fuel system. If you have chosen to use a fuel stabilizer and have not drained the fuel system, follow all safety instructions and storage precautions in this manual to prevent the possibility of fire from the ignition of gasoline fumes. Remember, gasoline fumes can travel to distant sources of ignition and ignite, causing risk of explosion and fire.

NOTE: Gasoline, if permitted to stand unused for extended periods (30 days or more), may develop gummy deposits which can adversely affect the engine carburetor and cause engine malfunction. To avoid this condition, add a gasoline stabilizer to the fuel tank and run the engine a few minutes, or drain all fuel from the unit before placing it in storage.

STARTING AFTER

LONG TERM STORAGE

Before starting the unit after it has been stored for a long period of time, perform the following steps.

Remove any blocks from under the unit.

Unplug the exhaust outlet and air cleaner.

Fill the fuel tank with fresh gasoline. See engine manual for recommendations.

See engine owner’s manual and follow all instructions for preparing engine after storage.

Check crankcase oil level and add proper oil if necessary. If any condensation has developed during storage, drain crankcase oil and refill.

Inflate tires to proper pressure. Check fluid levels.

Start the engine and let it run slowly. DO NOT run at high speed immediately after starting. Be sure to run engine only outdoors or in well ventilated area.

12

Image 13
Contents 13HP Walk-Behind Mower OPERATOR’S ManualTable of Contents Safety Rules & Information Slope Operation Safety Rules and InformationService & Maintenance Safety Rules & InformationSafe Handling of Gasoline CE Identification TAG Markings Identification NumbersID Tag Safety Decals Safety DecalsDecal Cutting Height Adjustment Monoxide PoisoningSafety Icons Safety IconsManual Control Functions Ignition SwitchGround Speed Control Handles / Operator Presence Features & Controls Checks Before Starting General Operating SafetyStarting the Engine Operation Starting After Long Term Storage StorageTemporary Storage 30 Days Or Less Long Term Storage Longer Than 30 DaysBefore Every Spring Each Hours 100 250 Fall Use Check Tire PressureTire Pressure Checking / Adding Fuel Regular MaintenanceFuel Filter OIL & Filter ChangeGreaseOil LubricationRemoving the Blade Servicing the Mower BladesMaintenance Records Troubleshooting the Mower Troubleshooting, Adjustments, & ServiceTroubleshooting the Mower Deck Troubleshooting, Adjustment & ServiceCutting Height Adjustment Troubleshooting, Adjustment & ServiceTo Adjust the Cutting Range To Adjust the Cutting HeightTo Level the Mower Deck Deck Leveling AdjustmentMower Deck Drive Belt 32 model Belt Removal and ReplacementTransaxle Drive Belt Adjusting the Lever Height Ground Speed Control Lever Location AdjustmentAdjusting the Lever Position Manual Start Electric StartBlade Brake Check PTO Clutch AdjustmentRO D U C T S