Snapper 13HP manual Table of Contents

Page 2

Table of Contents

Safety Rules & Information

2

Identification Numbers

5

Safety Decals & Icons

6

Features & Controls

8

Control Functions

8

Safety Interlock System

9

Operation

10

General Operating Safety

10

Checks Before Starting

10

Starting the Engine

10

Driving the Mower

10

Operating On A Slope

11

Stopping the Mower

11

Mowing

13

Pushing the Mower by Hand

13

Storage

12

Starting After Long Term Storage

12

Regular Maintenance

13

Maintenance Schedule

13

Checking Tire Pressure

13

Checking/Adding Fuel

14

Fuel Filter

14

Oil & Filter Change

14

Check / Change Air Filter

14

Replace Spark Plug

14

Transmission Maintenance

14

Lubrication

15

Servicing the Mower Blades

16

Troubleshooting, Adjustments & Service

18

Troubleshooting the Mower

18

Troubleshooting the Mower Deck

19

Cutting Height Adjustment

20

Deck Leveling Adjustment

21

Belt Removal and Replacement

22

Ground Speed Control Lever Adjustment

23

PTO Clutch Adjustment

24

NOTE: In this manual, “left” and “right” are referred to as seen from the operating position.

WARNING

You must read, understand and comply with all safety and operating instructions in this manual before attempting to set-up and operate your machine.

Failure to comply with all safety and operating instructions can result in loss of machine control, serious personal injury to you and / or bystanders, and risk of equipment and property damage. The triangle in the text signifies important cautions or warnings which must be followed.

WARNING

Engine exhaust from this product contains chemicals known, in certain quantities, to cause cancer, birth defects, or other reproductive harm.

1

Image 2
Contents OPERATOR’S Manual 13HP Walk-Behind MowerTable of Contents Safety Rules & Information Safety Rules and Information Slope OperationSafe Handling of Gasoline Safety Rules & InformationService & Maintenance ID Tag Identification NumbersCE Identification TAG Markings Decal Cutting Height Adjustment Safety DecalsSafety Decals Monoxide PoisoningManual Safety IconsSafety Icons Ground Speed Control Handles / Operator Presence Ignition SwitchControl Functions Features & Controls Starting the Engine General Operating SafetyChecks Before Starting Operation Temporary Storage 30 Days Or Less StorageStarting After Long Term Storage Long Term Storage Longer Than 30 DaysTire Pressure Check Tire PressureBefore Every Spring Each Hours 100 250 Fall Use Fuel Filter Regular MaintenanceChecking / Adding Fuel OIL & Filter ChangeLubrication GreaseOilServicing the Mower Blades Removing the BladeMaintenance Records Troubleshooting, Adjustments, & Service Troubleshooting the MowerTroubleshooting, Adjustment & Service Troubleshooting the Mower DeckTo Adjust the Cutting Range Troubleshooting, Adjustment & ServiceCutting Height Adjustment To Adjust the Cutting HeightDeck Leveling Adjustment To Level the Mower DeckTransaxle Drive Belt Belt Removal and ReplacementMower Deck Drive Belt 32 model Adjusting the Lever Position Ground Speed Control Lever Location AdjustmentAdjusting the Lever Height Manual Start Electric StartPTO Clutch Adjustment Blade Brake CheckRO D U C T S