Snapper 1660-0 owner manual Preparing the Unit for Storage, Engine Maintenance, Storing the Engine

Page 12

Snapper 2400 PSI Pressure Washer

5.Using a garden hose, remove additional debris by back flushing water through the nozzle extension

(Figure 15). Back flush between 30 to 60 seconds.Turn the adjustable nozzle extension to stream spray and move the nozzle from low to high while flushing.

Figure 15 — Backflushing the Nozzle

6.Reinstall the nozzle and in-line filter into the nozzle extension. Do Not overtighten the nozzle with the allen wrench.

7.Reconnect the nozzle extension to the spray gun.

8.Reconnect the water supply, turn on the water, and start the engine.

9.Test the pressure washer by operating with nozzle in the high and in the low positions.

O–Ring Maintenance

Through the normal operation of your pressure washer, o–rings are used to keep the connections of the hoses and spray gun tight and leak–free.These o-rings may become worn or damaged.

An O–Ring Maintenance Kit is provided with your pressure washer. It includes replacement o-rings, rubber washer and water inlet filter. Refer to the instruction sheet provided in the kit to service your unit’s o-rings. Note that you will not use all of the parts in the kit.

CAUTION! Avoid prolonged or repeated skin contact with used motor oil. Used motor oil has been shown to cause skin cancer in certain laboratory animals.Thoroughly wash exposed areas with soap and water.

KEEP OUT OF REACH OF CHILDREN. DON'T POLLUTE. CONSERVE RESOURCES. RETURN USED OIL TO COLLECTION CENTERS.

PREPARING THE UNIT FOR STORAGE

Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and “freeze” pump action. If you do not plan to use the pressure washer for more than 30 days, follow this procedure:

1.Flush detergent siphoning tube by placing the filter into a pail of clean water while running pressure washer in low pressure mode (adjustable nozzle in the forward position). Flush for one to two minutes.

2.Shut off the engine and let it cool, then remove high pressure and garden hoses. Disconnect spark plug wire from spark plug.

3.Empty the pump of all pumped liquids by pulling the recoil handle about 6 times.This should remove most of the liquid in the pump.

4.Use PumpSaver to treat pump.This prevents freeze damage and lubricates pistons and seals.

NOTE: If PumpSaver is not available, draw RV antifreeze (non-alcohol) into the pump by pouring the solution into a 3-foot section of garden hose connected to inlet adapter and pulling recoil handle twice.

To remove a worn or damaged o–ring:

•Use a small flathead screwdriver to get underneath the o-ring and pry it off.

ENGINE MAINTENANCE

See the engine owner’s manual for instructions on how to properly maintain the engine.

5.Store unit in a clean, dry area.

STORING THE ENGINE

See the engine owner’s manual for instructions on how to properly prepare the engine for storage.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Contact the Local Snapper Service Center 2400PSITable of Contents Safety RulesEquipment Description High pressure spray may damage fragile items including glass Know Your Pressure Washer Carton Contents Remove Pressure Washer from CartonWasher for USE Add Engine OilConnect Hose and Water Supply to Pump Typical Fuel Expansion SpaceChecklist Before Starting Engine HOW to USE Your Pressure WasherHow to Start Your Pressure Washer How to Stop Your Pressure Washer How to Use the Adjustable NozzleHow to Use the Turbo Nozzle Applying Detergent with the Adjustable NozzlePressure Washer Rinsing Automatic Cool Down SystemSpecifications General Maintenance RecommendationsPressure Washer Maintenance Check In-Line Filter Cleaning Detergent Siphoning Tube Nozzle MaintenanceTo remove contaminants from the pump, follow these steps Engine Maintenance Ring MaintenancePreparing the Unit for Storage Storing the EngineSnapper 2400 PSI Pressure Washer Troubleshooting Snapper 2400 PSI Pressure Washer Exploded View Main Unit Parts List Main Unit Qty DescriptionExploded View Pump Parts List Pump Snapper Owner Warranty Policy Effective October 1 Generac Portable Products, LLC Jefferson,Wisconsin U.S.A

1660-0 specifications

Snapper 1660-0 is a versatile and robust lawn mower designed for homeowners who seek efficiency and performance in their lawn care. Equipped with a powerful engine and advanced cutting technology, this mower stands out in the competitive market of residential lawn equipment.

One of the main features of the Snapper 1660-0 is its reliable 66-cc OHV engine. This engine delivers sufficient power to handle various types of grass and terrain, ensuring a clean and even cut. The mower's design focuses on user-friendly operation, allowing both seasoned gardeners and newcomers alike to achieve professional results with ease.

The cutting deck of the Snapper 1660-0 measures 21 inches, providing a suitable width for maneuvering around tight spaces while still allowing for efficient cutting of larger areas. The mower utilizes a rear-wheel drive system, which enhances traction and control, particularly on sloped or uneven landscapes. This feature is especially beneficial for homeowners with diverse lawn topographies.

One of the standout characteristics of the Snapper 1660-0 is its adjustable cutting height, which ranges from 1.25 to 4 inches. This adaptability allows users to customize the mowing experience based on their lawn’s specific needs, promoting healthier grass growth by enabling the user to choose the optimal height for their turf type.

In addition to these features, Snapper has integrated their renowned Hi-Vacuum cutting technology into the design of the 1660-0. This technology ensures that grass clippings are effectively lifted and cut, resulting in a superior finish and reduced need for raking or bagging afterward.

For ease of maintenance, the Snapper 1660-0 also includes a convenient washout port, allowing users to clean the underside of the mower deck easily and keep it in top condition. Furthermore, its compact design makes storage straightforward, fitting easily into shed or garage spaces.

Overall, the Snapper 1660-0 offers a combination of power, versatility, and user-friendliness, making it an excellent choice for homeowners looking to maintain their lawns efficiently. With its innovative features and strong performance, this mower is built to cater to the diverse needs of lawn care enthusiasts.
Top Page Image Contents