How to Use the Turbo Nozzle

Snapper 2400 PSI Pressure Washer

The turbo nozzle rotates the high pressure stream in a rapid circular pattern.The high pressure spray is most effective when the tip of the nozzle extension is held between 8 to 24 inches from the surface being cleaned.

Always start the turbo nozzle at a distance, gradually getting closer to the surface until you get the cleaning force you want.

WARNING! The turbo nozzle produces an extremely high pressure spray which is capable of removing paint and cutting holes through surfaces if held too close. Always make sure the surface you will clean will not be damaged by the high pressure spray by testing in a hidden area.

NOTE: You cannot apply detergent with the turbo nozzle.

Applying Detergent with the Adjustable Nozzle

IMPORTANT: Use soaps designed specifically for

pressure washers. Household detergents could damage the pump.

CAUTION! You must attach all hoses before you start the engine. Starting the engine without all the hoses connected and without the water turned ON will damage the pump.

To apply detergent, follow these steps:

•Review the use of adjustable nozzles.

•Prepare the detergent solution as required by the job.

•Place the filter end of the detergent siphoning tube into the detergent container.

CAUTION! Keep the detergent siphoning tube from coming in contact with the hot muffler.

•Slide the adjustable nozzle forward to low pressure mode. Detergent cannot be applied with the nozzle in high pressure position.

•Make sure the garden hose is connected to the water inlet. Check that the high pressure hose is connected to the spray gun and the pump. Start the engine.

•Apply the detergent to a dry surface, starting at lower portion of area to be washed and work upward, using long, even, overlapping strokes.

•Allow the detergent to "soak in" for 3-5 minutes before washing and rinsing. Reapply as needed to prevent surface from drying. Do Not allow the detergent to dry on (prevents streaking).

IMPORTANT: You must flush the chemical injection system after each use by placing the filter into a bucket of clean water, then run the pressure washer in low pressure for 1-2 minutes.

Pressure Washer Rinsing

WARNING! Be extremely careful if you must use the pressure washer from a ladder, scaffolding or any other relatively unstable location. Pressure in a running washer builds as you climb.When you press the trigger, the recoil from the initial spray could cause you to fall.The high pressure spray could also cause you to fall if you are too close to the cleaning surface.

For Rinsing:

•Slide the nozzle backward to high pressure, press the trigger and wait for the detergent to clear.

NOTE: You can also stop detergent from flowing by simply removing detergent siphoning tube from bottle.

•Keep the spray gun a safe distance from the area you plan to spray.

•Apply a high pressure spray to a small area, then check the surface for damage. If no damage is found, it is okay to continue cleaning.

•Start at the top of the area to be rinsed, working down with same overlapping strokes as you used for washing and applying detergent.

Automatic Cool Down System

(Thermal Relief)

If you run the engine on your pressure washer for

3-5 minutes without pressing the trigger on the spray gun, circulating water in the pump can reach a temperature between 140–145°F.When the water reaches this temperature, the automatic cool down system engages and cools the pump by discharging the warm water onto the ground. This system prevents internal damage to the pump.

1660-0 specifications

Snapper 1660-0 is a versatile and robust lawn mower designed for homeowners who seek efficiency and performance in their lawn care. Equipped with a powerful engine and advanced cutting technology, this mower stands out in the competitive market of residential lawn equipment.

One of the main features of the Snapper 1660-0 is its reliable 66-cc OHV engine. This engine delivers sufficient power to handle various types of grass and terrain, ensuring a clean and even cut. The mower's design focuses on user-friendly operation, allowing both seasoned gardeners and newcomers alike to achieve professional results with ease.

The cutting deck of the Snapper 1660-0 measures 21 inches, providing a suitable width for maneuvering around tight spaces while still allowing for efficient cutting of larger areas. The mower utilizes a rear-wheel drive system, which enhances traction and control, particularly on sloped or uneven landscapes. This feature is especially beneficial for homeowners with diverse lawn topographies.

One of the standout characteristics of the Snapper 1660-0 is its adjustable cutting height, which ranges from 1.25 to 4 inches. This adaptability allows users to customize the mowing experience based on their lawn’s specific needs, promoting healthier grass growth by enabling the user to choose the optimal height for their turf type.

In addition to these features, Snapper has integrated their renowned Hi-Vacuum cutting technology into the design of the 1660-0. This technology ensures that grass clippings are effectively lifted and cut, resulting in a superior finish and reduced need for raking or bagging afterward.

For ease of maintenance, the Snapper 1660-0 also includes a convenient washout port, allowing users to clean the underside of the mower deck easily and keep it in top condition. Furthermore, its compact design makes storage straightforward, fitting easily into shed or garage spaces.

Overall, the Snapper 1660-0 offers a combination of power, versatility, and user-friendliness, making it an excellent choice for homeowners looking to maintain their lawns efficiently. With its innovative features and strong performance, this mower is built to cater to the diverse needs of lawn care enthusiasts.