Snapper 020231 How to Use Spray Tips, Low Pressure, High Pressure, Cleaning and Applying Chemical

Page 11

3000 PSI Pressure Washer

3.Place spray gun on hook attached to accessory tray on right side of unit (Figure 15).

4.Hang high pressure hose on hook attached to accessory tray on left side of unit as shown on page 5.

How to Use Spray Tips

The quick–connect on the nozzle extension allows you to switch between four different spray tips.The spray tips vary the spray pattern as shown (Figure 16).

CAUTION

A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.

•NEVER exchange spray tips without locking the safety latch on the trigger.

Follow these instructions to change spray tips:

1.Engage trigger lock on spray gun.

2.Pull back collar on quick–connect and pull current spray tip off. Store spray tips in holder provided on the nozzle extension.

3.Select desired spray tip:

•For gentle rinse, select white 40° spray tip.

•To scour surface, select yellow 15° or red 0° spray tip.

•To apply chemical, select black spray tip.

Figure 16 — Spray Tip Spray Patterns

Low Pressure

Black

Use to apply

chemical

High Pressure

 

 

 

15° Yellow

 

0° Red

40° White

 

 

 

 

 

 

4.Pull back on collar, insert new spray tip and release collar. Tug on spray tip to make sure it is securely in place.

5.For most effective cleaning, keep spray tip from 8 to

24 inches away from cleaning surface. If you get spray tip too close, you may damage cleaning surface.

6.DO NOT get closer than 6 inches when cleaning tires.

Cleaning and Applying Chemical

IMPORTANT: Use soaps designed specifically for

pressure washers. Household detergents could damage the pump.

CAUTION

You must attach all hoses before you start the engine.

•Starting the engine without all the hoses connected and without the water turned ON will damage the pump.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

To apply detergent follow these steps:

1.Review spray tip use.

2.Prepare detergent solution as required by manufacturer.

3.Hang detergent solution on “J” hook attached to accessory tray, as shown in Figure 17.

Figure 17 — Insert Filter into Container

3.Place small filter end of detergent siphoning tube into detergent container.

CAUTION

Keep the chemical injection tube from coming in contact with the hot muffler.

•When inserting filter into a detergent solution bottle, route tube to keep it from inadvertently contacting hot muffler.

4.Make sure black spray tip is installed.

NOTE: Detergent cannot be applied with the high pressure spray tips (White,Yellow, or Red).

5.Make sure garden hose is connected to water inlet. Check that high pressure hose is connected to spray gun and pump and start engine.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents PSI Pressure Washer Equipment Description Table of ContentsSafety Rules Operate pressure washer only outdoors When Adding FuelHigh pressure spray may damage fragile items including glass Nozzle Extension with Know Your Pressure WasherChoke Lever Recoil StarterPreparing Pressure Washer for USE AssemblyCarton Contents Attach Handle and Accessory TrayHandle Align Holes Supports Add Engine Oil and FuelScreen, do Checklist Before Starting EngineConnect Hose and Water Supply to Pump Inspect inletPressure Washer Clearance HOW to USE Your Pressure WasherHow to Start Pressure Washer Pressure Washer LocationHow to Use Accessory Tray How to Stop Your Pressure WasherHigh Pressure How to Use Spray TipsCleaning and Applying Chemical Low PressureThermal Relief Cleaning Detergent Siphoning TubePressure Washer Rinsing Automatic Cool Down SystemPressure Washer Maintenance SpecificationsGeneral Maintenance Recommendations Pump Maintenance Engine MaintenanceNozzle Maintenance Ring MaintenanceProtecting the Pump Always wear eye protection when using PumpSaverPreparing the Unit for Storage Storing the EnginePSI Pressure Washer PSI Pressure Washer Problem Cause Correction TroubleshootingPortable Generator Years 2nd year parts only Snapper Owner Warranty Policy Effective August 1About your equipment warranty Equipment Consumer Use Commercial UseAdvertencia Conserve Estas Instrucciones Tabla DE ContenidosDescripción DEL Equipo Reglas DE SeguridadCuando Añada Combustible Precaución Perilla del Cebador Usada para arranque de motores fríos Conozca SU Maquina Lavadora DE PresionFiltro de Aire Etiqueta de Datos Bomba equipado conContenido de la Caja MontajePreparando EL Lavador a Presión Para SU USO Remueva el Lavador a Presión del EmpaqueColoque la lavadora a presión sobre una superficie nivelada Agregar Aceite al Motor y GasolinaManubrio Alinear Orificios Soportes del Proporcione el suministro de agua adecuado Conecte la Manguera y el Suministro de Agua a la BombaLista de Revision Previa al Arranque del Motor Deposite la gasolina adecuada en el tanque del combustibleCómo Darle Arranque a su Lavadora a Presión Cómo Usar SU Lavadora a PresiónPeligro Ubicación del Lavadora a PresiónFigura 35 Control de la Válvula de Admisión Cómo Detener su Máquina Lavadora a PresiónLa Presión Alta Utilización de la Charola de AccesoriosCómo Usar las Puntas de Rocío La Presión BajaEnjuage de la Máquina Lavadora a Presión Limpieza y Aplicación del QuímicoSistema de Enfriamiento Automático Alivio Térmico Limpiando el TuboMantenimiento DE LA Maquina Lavadora a Presion EspecificacionesRecomendaciones Generales Mantenimiento de la Bomba Mantenimiento DEL MotorMantenimiento de la Boquilla Mantenimiento de los Anillos OProteger la Bomba Preparando LA Unidad Para SU AlmacenamientoAlmacenando EL Motor Reparacion DE Averias Año Efectiva desde el 1 ro de AgostoEquipo Para Uso Del Consumidor Para Uso Comercial Generador Portátil

020231 specifications

Snapper 020231 is a remarkable addition to the world of outdoor power equipment, specifically designed for homeowners and landscaping professionals looking for efficiency and reliability in their yard maintenance tasks. As part of Snapper’s renowned line of lawn care products, the 020231 model stands out due to its innovative features and advanced technologies that elevate user experience.

One of the most notable features of the Snapper 020231 is its powerful 190cc engine. This high-performance engine ensures robust cutting power and durability, allowing the mower to tackle various grass types and terrain with ease. The machine’s cutting deck is 21 inches wide, designed for precise cutting and efficient trimming, minimizing the time spent mowing while ensuring a clean cut every time.

The Snapper 020231 is equipped with a unique pivoting front wheel design, which enhances maneuverability around obstacles like trees, flower beds, and fences. This feature allows users to navigate tight spaces effortlessly, making yard work not only efficient but also less strenuous. Additionally, the adjustable cutting height feature offers multiple height positions, allowing users to customize their mowing experience based on the type of grass and desired finish.

One of the highlights of Snapper’s innovation is the easy-to-use, self-propelled feature available in the 020231. This technology allows users to set their desired speed while the mower moves forward, reducing physical strain and allowing for a consistent mowing pace. Furthermore, the ergonomic handle provides extra comfort while mowing, allowing users to maintain control and stability.

Snapper has also integrated SmartMulch technology into the 020231 model. This unique mulching capability allows for efficient grass disposal by finely chopping clippings and returning them to the lawn. This not only nourishes the soil but also eliminates the need for bagging and disposal, contributing to a healthier lawn ecosystem.

Safety features are paramount with the Snapper 020231. The operator presence control ensures that the engine stops when the handle is released, preventing accidental starts and enhancing user safety. Additionally, the durable construction and high-quality materials used in the mower's design ensure its longevity, making it a worthy investment for any homeowner or professional landscaper.

In conclusion, Snapper 020231 stands out as a high-quality, efficient, and reliable lawn mower that meets the diverse needs of its users. With its powerful engine, advanced technologies, and user-friendly design, it promises to deliver the performance and reliability users expect from the Snapper brand in every mowing task.
Top Page Image Contents