Snapper 020231 owner manual High pressure spray may damage fragile items including glass

Page 4

3000 PSI Pressure Washer

WARNING

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact.

Combustible debris, such as leaves, grass, brush, etc. can catch fire.

•DO NOT touch hot surfaces.

•Allow equipment to cool before touching.

•The pressure washer must be at least 5 feet from structures having combustible walls and/or other combustible materials.

•Keep at least 3 feet of clearance on all sides of pressure washer for adequate cooling, maintenance and servicing.

•In the State of California a spark arrester is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. If you equip the muffler with a spark arrester, it must be maintained in effective working order.

WARNING

Starter and other rotating parts can entangle hands, hair, clothing, or accessories.

•DO NOT wear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts.

•Tie up long hair and remove jewelry.

WARNING

High pressure spray can cause paint chips or other particles to become airborne.

•Always wear eye protection when using this equipment or in vicinity of where equipment is in use.

WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER

•Disconnect spark plug wire from spark plug and place wire where it cannot contact spark plug.

CAUTION

Excessively high or low operating speeds increase risk of injury and damage to pressure washer.

•DO NOT tamper with governed speed.

•DO NOT operate pressure washer above rated pressure.

CAUTION

A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.

•DO NOT secure spray gun in open position.

•DO NOT leave spray gun unattended while machine is running.

•NEVER use a spray gun which does not have a trigger lock or trigger guard in place and in working order.

•Always be certain spray gun, nozzles and accessories are correctly attached.

CAUTION

High pressure spray may damage fragile items including glass.

•DO NOT point spray gun at glass when in jet spray mode.

•NEVER aim spray gun at plants.

CAUTION

Improper treatment of pressure washer can damage it and shorten its life.

•If you have questions about intended use, ask dealer or contact Briggs & Stratton Power Products.

•NEVER operate units with broken or missing parts, or without protective housing or covers.

•DO NOT by–pass any safety device on this machine.

•Before starting pressure washer in cold weather, check all parts of the equipment to be sure ice has not formed there.

•NEVER move machine by pulling on high pressure hose. Use handle provided on unit.

•Check fuel system for leaks or signs of deterioration, such as chafed or spongy hose, loose or missing clamps, or damaged tank or cap. Correct all defects before operating pressure washer.

•This equipment is designed to be used with Briggs & Stratton Power Products authorized parts ONLY. If equipment is used with parts that DO NOT comply with minimum specifications, user assumes all risks and liabilities.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents PSI Pressure Washer Safety Rules Table of ContentsEquipment Description When Adding Fuel Operate pressure washer only outdoorsHigh pressure spray may damage fragile items including glass Know Your Pressure Washer Choke LeverRecoil Starter Nozzle Extension withAssembly Carton ContentsAttach Handle and Accessory Tray Preparing Pressure Washer for USEAdd Engine Oil and Fuel Handle Align Holes SupportsChecklist Before Starting Engine Connect Hose and Water Supply to PumpInspect inlet Screen, doHOW to USE Your Pressure Washer How to Start Pressure WasherPressure Washer Location Pressure Washer ClearanceHow to Stop Your Pressure Washer How to Use Accessory TrayHow to Use Spray Tips Cleaning and Applying ChemicalLow Pressure High PressureCleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal ReliefGeneral Maintenance Recommendations SpecificationsPressure Washer Maintenance Engine Maintenance Nozzle MaintenanceRing Maintenance Pump MaintenanceAlways wear eye protection when using PumpSaver Preparing the Unit for StorageStoring the Engine Protecting the PumpPSI Pressure Washer PSI Pressure Washer Troubleshooting Problem Cause CorrectionSnapper Owner Warranty Policy Effective August 1 About your equipment warrantyEquipment Consumer Use Commercial Use Portable Generator Years 2nd year parts onlyConserve Estas Instrucciones Tabla DE Contenidos Descripción DEL EquipoReglas DE Seguridad AdvertenciaCuando Añada Combustible Precaución Conozca SU Maquina Lavadora DE Presion Filtro de AireEtiqueta de Datos Bomba equipado con Perilla del Cebador Usada para arranque de motores fríosMontaje Preparando EL Lavador a Presión Para SU USORemueva el Lavador a Presión del Empaque Contenido de la CajaManubrio Alinear Orificios Soportes del Agregar Aceite al Motor y GasolinaColoque la lavadora a presión sobre una superficie nivelada Conecte la Manguera y el Suministro de Agua a la Bomba Lista de Revision Previa al Arranque del MotorDeposite la gasolina adecuada en el tanque del combustible Proporcione el suministro de agua adecuadoCómo Usar SU Lavadora a Presión PeligroUbicación del Lavadora a Presión Cómo Darle Arranque a su Lavadora a PresiónCómo Detener su Máquina Lavadora a Presión Figura 35 Control de la Válvula de AdmisiónUtilización de la Charola de Accesorios Cómo Usar las Puntas de RocíoLa Presión Baja La Presión AltaLimpieza y Aplicación del Químico Enjuage de la Máquina Lavadora a PresiónLimpiando el Tubo Sistema de Enfriamiento Automático Alivio TérmicoRecomendaciones Generales EspecificacionesMantenimiento DE LA Maquina Lavadora a Presion Mantenimiento DEL Motor Mantenimiento de la BoquillaMantenimiento de los Anillos O Mantenimiento de la BombaAlmacenando EL Motor Preparando LA Unidad Para SU AlmacenamientoProteger la Bomba Reparacion DE Averias Efectiva desde el 1 ro de Agosto Equipo Para Uso Del Consumidor Para Uso ComercialGenerador Portátil Año

020231 specifications

Snapper 020231 is a remarkable addition to the world of outdoor power equipment, specifically designed for homeowners and landscaping professionals looking for efficiency and reliability in their yard maintenance tasks. As part of Snapper’s renowned line of lawn care products, the 020231 model stands out due to its innovative features and advanced technologies that elevate user experience.

One of the most notable features of the Snapper 020231 is its powerful 190cc engine. This high-performance engine ensures robust cutting power and durability, allowing the mower to tackle various grass types and terrain with ease. The machine’s cutting deck is 21 inches wide, designed for precise cutting and efficient trimming, minimizing the time spent mowing while ensuring a clean cut every time.

The Snapper 020231 is equipped with a unique pivoting front wheel design, which enhances maneuverability around obstacles like trees, flower beds, and fences. This feature allows users to navigate tight spaces effortlessly, making yard work not only efficient but also less strenuous. Additionally, the adjustable cutting height feature offers multiple height positions, allowing users to customize their mowing experience based on the type of grass and desired finish.

One of the highlights of Snapper’s innovation is the easy-to-use, self-propelled feature available in the 020231. This technology allows users to set their desired speed while the mower moves forward, reducing physical strain and allowing for a consistent mowing pace. Furthermore, the ergonomic handle provides extra comfort while mowing, allowing users to maintain control and stability.

Snapper has also integrated SmartMulch technology into the 020231 model. This unique mulching capability allows for efficient grass disposal by finely chopping clippings and returning them to the lawn. This not only nourishes the soil but also eliminates the need for bagging and disposal, contributing to a healthier lawn ecosystem.

Safety features are paramount with the Snapper 020231. The operator presence control ensures that the engine stops when the handle is released, preventing accidental starts and enhancing user safety. Additionally, the durable construction and high-quality materials used in the mower's design ensure its longevity, making it a worthy investment for any homeowner or professional landscaper.

In conclusion, Snapper 020231 stands out as a high-quality, efficient, and reliable lawn mower that meets the diverse needs of its users. With its powerful engine, advanced technologies, and user-friendly design, it promises to deliver the performance and reliability users expect from the Snapper brand in every mowing task.
Top Page Image Contents