Snapper 020231 Preparing the Unit for Storage, Storing the Engine, Protecting the Pump

Page 15

3000 PSI Pressure Washer

PREPARING THE UNIT FOR STORAGE

Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and “freeze” pump action. If you do not plan to use the pressure washer for more than 30 days, follow this procedure:

1.Flush detergent siphoning tube by placing the filter into a pail of clean water while running pressure washer in low pressure mode. Flush for one to two minutes.

2.Shut off the engine and let it cool, then remove high pressure and garden hoses. Disconnect spark plug wire from spark plug.

3.Empty the pump of liquids by pulling the engine recoil handle about 6 times.This should remove most of the liquid in the pump.

4.Use pump saver to prevent corrosion build up and freezing of pump.

5.Store unit in a clean, dry area.

Protecting the Pump

To protect the pump from damage caused by mineral deposits or freezing, use PumpSaver to treat pump.This prevents freeze damage and lubricates pistons and seals.

NOTE: PumpSaver is available as an optional accessory. It is not included with the pressure washer. Contact the nearest authorized service center to purchase PumpSaver.

CAUTION

You must protect your unit from freezing temperatures.

•Failure to do so will permanently damage your pump and render your unit inoperable.

•Freeze damage is not covered under warranty.

CAUTION

Read and follow all cautions and warnings on the PumpSaver can label.

• Always wear eye protection when using PumpSaver.

CAUTION

PumpSaver will drip from pump after treatment and will stain wood and concrete.

• Protect surfaces from dripping PumpSaver.

To use PumpSaver, make sure the pressure washer is turned off and disconnected from supply water. Read and follow all instructions and warnings given on the PumpSaver container.

NOTE: If PumpSaver is not available, draw RV antifreeze (non-alcohol) into the pump by pouring the solution into a 3-foot section of garden hose connected to inlet adapter and pulling recoil handle twice.

STORING THE ENGINE

See the engine owner’s manual for instructions on how to properly prepare the engine for storage.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents PSI Pressure Washer Table of Contents Safety RulesEquipment Description Operate pressure washer only outdoors When Adding FuelHigh pressure spray may damage fragile items including glass Nozzle Extension with Know Your Pressure WasherChoke Lever Recoil StarterPreparing Pressure Washer for USE AssemblyCarton Contents Attach Handle and Accessory TrayHandle Align Holes Supports Add Engine Oil and FuelScreen, do Checklist Before Starting EngineConnect Hose and Water Supply to Pump Inspect inletPressure Washer Clearance HOW to USE Your Pressure WasherHow to Start Pressure Washer Pressure Washer LocationHow to Use Accessory Tray How to Stop Your Pressure WasherHigh Pressure How to Use Spray TipsCleaning and Applying Chemical Low PressureThermal Relief Cleaning Detergent Siphoning TubePressure Washer Rinsing Automatic Cool Down SystemSpecifications General Maintenance RecommendationsPressure Washer Maintenance Pump Maintenance Engine MaintenanceNozzle Maintenance Ring MaintenanceProtecting the Pump Always wear eye protection when using PumpSaverPreparing the Unit for Storage Storing the EnginePSI Pressure Washer PSI Pressure Washer Problem Cause Correction TroubleshootingPortable Generator Years 2nd year parts only Snapper Owner Warranty Policy Effective August 1About your equipment warranty Equipment Consumer Use Commercial UseAdvertencia Conserve Estas Instrucciones Tabla DE ContenidosDescripción DEL Equipo Reglas DE SeguridadCuando Añada Combustible Precaución Perilla del Cebador Usada para arranque de motores fríos Conozca SU Maquina Lavadora DE PresionFiltro de Aire Etiqueta de Datos Bomba equipado conContenido de la Caja MontajePreparando EL Lavador a Presión Para SU USO Remueva el Lavador a Presión del EmpaqueAgregar Aceite al Motor y Gasolina Manubrio Alinear Orificios Soportes delColoque la lavadora a presión sobre una superficie nivelada Proporcione el suministro de agua adecuado Conecte la Manguera y el Suministro de Agua a la BombaLista de Revision Previa al Arranque del Motor Deposite la gasolina adecuada en el tanque del combustibleCómo Darle Arranque a su Lavadora a Presión Cómo Usar SU Lavadora a PresiónPeligro Ubicación del Lavadora a PresiónFigura 35 Control de la Válvula de Admisión Cómo Detener su Máquina Lavadora a PresiónLa Presión Alta Utilización de la Charola de AccesoriosCómo Usar las Puntas de Rocío La Presión BajaEnjuage de la Máquina Lavadora a Presión Limpieza y Aplicación del QuímicoSistema de Enfriamiento Automático Alivio Térmico Limpiando el TuboEspecificaciones Recomendaciones GeneralesMantenimiento DE LA Maquina Lavadora a Presion Mantenimiento de la Bomba Mantenimiento DEL MotorMantenimiento de la Boquilla Mantenimiento de los Anillos OPreparando LA Unidad Para SU Almacenamiento Almacenando EL MotorProteger la Bomba Reparacion DE Averias Año Efectiva desde el 1 ro de AgostoEquipo Para Uso Del Consumidor Para Uso Comercial Generador Portátil

020231 specifications

Snapper 020231 is a remarkable addition to the world of outdoor power equipment, specifically designed for homeowners and landscaping professionals looking for efficiency and reliability in their yard maintenance tasks. As part of Snapper’s renowned line of lawn care products, the 020231 model stands out due to its innovative features and advanced technologies that elevate user experience.

One of the most notable features of the Snapper 020231 is its powerful 190cc engine. This high-performance engine ensures robust cutting power and durability, allowing the mower to tackle various grass types and terrain with ease. The machine’s cutting deck is 21 inches wide, designed for precise cutting and efficient trimming, minimizing the time spent mowing while ensuring a clean cut every time.

The Snapper 020231 is equipped with a unique pivoting front wheel design, which enhances maneuverability around obstacles like trees, flower beds, and fences. This feature allows users to navigate tight spaces effortlessly, making yard work not only efficient but also less strenuous. Additionally, the adjustable cutting height feature offers multiple height positions, allowing users to customize their mowing experience based on the type of grass and desired finish.

One of the highlights of Snapper’s innovation is the easy-to-use, self-propelled feature available in the 020231. This technology allows users to set their desired speed while the mower moves forward, reducing physical strain and allowing for a consistent mowing pace. Furthermore, the ergonomic handle provides extra comfort while mowing, allowing users to maintain control and stability.

Snapper has also integrated SmartMulch technology into the 020231 model. This unique mulching capability allows for efficient grass disposal by finely chopping clippings and returning them to the lawn. This not only nourishes the soil but also eliminates the need for bagging and disposal, contributing to a healthier lawn ecosystem.

Safety features are paramount with the Snapper 020231. The operator presence control ensures that the engine stops when the handle is released, preventing accidental starts and enhancing user safety. Additionally, the durable construction and high-quality materials used in the mower's design ensure its longevity, making it a worthy investment for any homeowner or professional landscaper.

In conclusion, Snapper 020231 stands out as a high-quality, efficient, and reliable lawn mower that meets the diverse needs of its users. With its powerful engine, advanced technologies, and user-friendly design, it promises to deliver the performance and reliability users expect from the Snapper brand in every mowing task.
Top Page Image Contents