La Crosse Technology WS-9013U instruction manual VIII. Setting the LCD Contrast

Page 13

VIII. SETTING THE LCD CONTRAST

1.Press and hold the “SET” button for 3 seconds or until “12h” or “24h” flashes in the DATE LCD.

2.Press and release the “SET” button 10 more times to reach the LCD contrast setting mode.

3. The default setting—“Lcd 5” will flash in the DATE LCD.

4. There are 8 LCD contrast levels to choose from—“Lcd 0” is the lightest and “Lcd 7” is the darkest.

5.Press and release the “CH” button to toggle through the settings.

6.Press and release either the “IN” or “OUT” buttons to confirm all the settings and to exit the manual-programming mode (or wait 15 seconds for the unit to automatically return to the normal display mode).

13

Image 13

Contents WS-9013U Wireless 433 MHz Radio-controlled Weather Station Contents Inventory of Contents About Wwvb Radio Controlled Time Do not Press ANY Buttons for 15 Minutes Quick SET-UP GuideIndoor Weather Station Programming Sequence Program ModeIII. Time Zone Setting II or 24 Hour Time SettingII. Function Keys Date LCDIV. Daylight Saving Time DST Setting Manual Time Setting Wwvb Remote Control TimeTime VI. Setting the DAY, DATE, and Year VII. Selecting F or C VIII. Setting the LCD Contrast Indoor Temperature Features of the WS-9013UII. Outdoor Temperature Viewing the Indoor Temperature Records III. Minimum and Maximum Temperature RecordsViewing the Outdoor Temperature Records IV. Adding Outdoor Remote Control Senders Optional Resetting the Mimimum and Maximum RecordsSET-UP of Multiple Units Outdoor LCD Mounting with Screws Mounting Remote Temperature SensorMounting with Adhesive Tape Using the Table Stand II. the Indoor Temperature StationWall Mounting Maintenance and Care Instructions TroubleshootingTemperature measuring range SpecificationsPower Supply Dimensions H x W x DWarranty Information FCC ID OMO-01RX receiver, OMO-01TX sensor