Program Mode, Programming Sequence | La Crosse Technology WS-9013U

PROGRAM MODE

Programming Note: If 30 seconds are allowed to pass or either the IN or the OUT button is pressed during programming modes, the unit will set the last information entered—the display will stop flashing and return to normal time-date readings. If you don’t leave the program mode during the programming of sections III through VIII, you can advance to step 3 of the next program setting. If you do leave the program setting (or want to program a specific setting) follow each instructional step to program that setting.

I. PROGRAMMING SEQUENCE

The sequence for programming the indoor weather station and the default

(factory) settings are:
1.	12/24 hour time setting	12 hour
2.	Time Zone	Zo -5 (eastern)
3.	Daylight Saving Time	1 (on)
4.	Time – hour	12
5.	Time – minute	00
6.	Date – day of the week	mo (Monday)
7.	Date – month	1 (January)
8.	Date – day of the month	1
9.	Date – Year	1999
10.	Temperature	°F
11.	LCD (liquid crystal display) contrast	5
12.	End of sequence

The programming instructions are given in a manner so that each setting is done separately. On initial set-up and after inserting new batteries to program all functions simply disregard the first two steps of each section starting with the Time Zone Setting.