La Crosse Technology WS-9013U instruction manual Outdoor LCD

Page 17

3.Place all remote temperature sensor units in a numeric sequential order.

4.In sequential order, install batteries (follow the same battery installation procedures seen in section I. A) of the Detailed Set-Up Guide).

5.Install batteries into the indoor weather station.

6.Follow the Detailed Set-Up Guide for programming and operating instructions.

B.VIEWING AND OPERATING WITH MULTIPLE REMOTE TEMPERATURE SENSOR UNITS

1.To view the temperature of a different remote temperature sensor unit, press and release the “CH” button. A shift from one “boxed” number to the next should be observed in the

OUTDOOR LCD.

2.To view the Minimum/Maximum temperature: first select which remote temperature sensor to read data from (indicated by the “boxed” number), then press and release the “MIN/MAX” button. Pressing this button once will display the minimum temperature and the date and time the data was recorded. Pressing this button a second time (while “MIN” is still displayed, otherwise press the button twice) will display the same data for the maximum recordings.

3.To reset the Minimum/Maximum readings, it is necessary to select which remote temperature sensor you wish to reset. Press and hold the “OUT” button for 5 seconds, the records for the selected remote temperature sensor unit will be reset.

17

Image 17
Contents WS-9013U Wireless 433 MHz Radio-controlled Weather Station Contents Inventory of Contents About Wwvb Radio Controlled Time Do not Press ANY Buttons for 15 Minutes Quick SET-UP GuideIndoor Weather Station Programming Sequence Program ModeIII. Time Zone Setting II or 24 Hour Time SettingII. Function Keys Date LCDIV. Daylight Saving Time DST Setting Time Wwvb Remote Control TimeManual Time Setting VI. Setting the DAY, DATE, and Year VII. Selecting F or C VIII. Setting the LCD Contrast II. Outdoor Temperature Features of the WS-9013UIndoor Temperature Viewing the Outdoor Temperature Records III. Minimum and Maximum Temperature RecordsViewing the Indoor Temperature Records SET-UP of Multiple Units Resetting the Mimimum and Maximum RecordsIV. Adding Outdoor Remote Control Senders Optional Outdoor LCD Mounting with Adhesive Tape Mounting Remote Temperature SensorMounting with Screws Wall Mounting II. the Indoor Temperature StationUsing the Table Stand Maintenance and Care Instructions TroubleshootingTemperature measuring range SpecificationsPower Supply Dimensions H x W x DWarranty Information FCC ID OMO-01RX receiver, OMO-01TX sensor