Honeywell TE923W user manual Wind Cups Shaft

Page 14

E. WIND CUPS SHAFT

Holds wind cups on the anemometer arm

F. BATTERY COMPARTMENT

Holds 2 AA-size batteries

G. WALL MOUNT SCREW OPENINGS

Allows securing the anemometer in place

H. BATTERY COVER

Secures battery compartment on the anemometer base

Assembly

•Slide the wind cups on to the anemometer rotating shaft. Do not use force.

•Insert the longer arm of the Allen Wrench (provided) into the wind cup set screw opening. Feel the head of the set screw inside the wind cups and tighten carefully the set screw securing the wind cups to the rotating shaft.

•Test to ensure cups are securely fastened to the shaft and cannot be removed

Battery installation

•Remove four (4) screws from the battery compartment with a small Phillips screwdriver.

•Open the battery compartment and install 2 “AA” size alkaline batteries (not included) matching the polarities shown.

•Do not close battery compartment yet as you need to make sure that the anemometer sends the signal to the main unit (0.0 mph will appear on the main unit’s wind window if the signal was sent and received successfully)

Aligning

This procedure must be performed after main unit has been powered and all remote weather sensors signals were received successfully.

•Manually point the wind direction vane to the north (use a compass or map if necessary).

•Press the “SET” button located inside battery compartment (on the shorter side) with a paper clip. “SET” button selects a new direction for NORTH and, when pressed repeatedly, alternates between the factory default NORTH and user selected NORTH.

•Watch for the next anemometer data transmission in the main unit’s wind window – the direction will be updated

•Replace the battery compartment door and secure the screws.

Note: Repeat aligning procedure every time after changing the batteries.

Mounting

Mount the anemometer onto a vertical surface, using the fittings provided.

Placement tips:

•The anemometer should be mounted in an open area with a free air flow; away from the

14

Image 14

Contents Honeywell Professional Weather Station With Remote Control TE923WPrecautions Introduction This package you will findStandard Package Contents Installation Mounting hardwareBefore you begin Ultraviolet UV SensorBattery installation Battery Compartment Holds two AA-size batteriesAssembly Stake MountingGround WallPlacement tips Remote Thermo-Hygrometer SensorPlacement OperationRain Gauge Mounting Anemometer wind sensor Wind Cups Shaft Weather Main UnitTime Power DisplayExample 350 feet means 350 feet three hundred fifty feet HIJMain unit and handheld remote control adequate buttons Buttons and ControlsWind Button UV Button Pressure & Weather Main unit onlyUSB Port Forecast Button Rain Button Clock and Alarm ButtonInitial Set Up Sunrise/Sunset ButtonConnecting Weather Station to a Personal Computer Pressure and Weather Forecast Window Displays Clock and Alarms Window DisplaysNavigating through the modes UV Window DisplaysTemperature and Humidity Window Displays Sunrise/Sunset Window DisplaysRain Window Displays Wind Window DisplaysPressure and Weather Forecast Window Operations and Window SelectionCustomizing your Weather Station Programming Pressure & Altitude Parameters Accessing Pressure and Weather Forecast WindowChanging or Setting Sea Level Pressure Viewing the Pressure and Altitude InformationViewing the Sea Level Pressure History Changing or Setting AltitudeViewing Pressure, Temperature and Humidity Bar Charts Understanding Weather Forecast Icons Display Setting Units for UV Display MED/h or UVI Accessing UV WindowResetting the UV Statistics Memory Time Window Manual SettingsManual Programming Programming your locationAuto-programming Clock and Calendar Modes Activating or deactivating alarmsProgramming Alarms To disable alarms Activating or Deactivating SnoozeSunrise/Sunset Window Accessing Sunrise/Sunset WindowIcon Viewing Sunrise/Sunset Times for Different Dates Programming Latitude, Longitude, Time Zone and DSTViewing Location Data Understanding of Sunrise/Sunset InformationComfort Level Indication Temperature and Humidity WindowIndicator Temperature Humidity Shows current condition RangeProgramming Temperature in Celsius or Fahrenheit Accessing Temperature and Humidity ModeViewing Remote Channel Temperature and Humidity Accessing Rain Window Resetting Remote Temperature and Humidity MemoryAll Remote Sensor Signals Search Activation Remote Sensor StatusProgramming Daily Rainfall Alarm Resetting the Rainfall Statistics MemoryActivating or Deactivating Rain Alarm Accessing Wind ModeOperating Wind Window Resetting Wind Statistics MemoryProgramming High Wind Alarm Programming Wind Speed UnitsMaintenance Troubleshooting Issue source Symptom SolutionPage Appendix City Codes US and Canadian CitiesBCN Specifications Sunrise and Sunset Humidity IndoorHumidity Outdoor Ultraviolet lightDimensions Battery life alkalineWeight without batteries Declaration of Conformity

Related manuals

Manual 46 pages 6.67 Kb

TE923W specifications

The Honeywell TE923W is a sophisticated weather station that provides users with real-time data and insights into weather conditions. This versatile device combines advanced technology with user-friendly features, making it an essential tool for anyone interested in tracking and understanding weather patterns.

One of the main features of the TE923W is its ability to deliver accurate weather forecasts. The station uses a combination of sensors to monitor various environmental factors, including temperature, humidity, wind speed, and rainfall. This information is processed to provide reliable forecasts for up to 12 hours ahead, allowing users to plan their activities accordingly.

The TE923W boasts a large, easy-to-read LCD display that shows a wealth of data at a glance. Users can view current indoor and outdoor temperatures, humidity levels, and atmospheric pressure. Additionally, the display features weather icons that represent the current weather conditions, making it simple for users to interpret the data visually.

Another standout characteristic of the Honeywell TE923W is its wireless connectivity. The device includes a wireless outdoor sensor that can transmit data from up to 330 feet away. This means users can place the sensor outside, where it can accurately measure outdoor conditions without being tethered by wires. The wireless connection also allows users to position their weather station in an ideal location for optimal readings.

In terms of power, the TE923W is designed for convenience. It can be powered using either batteries or an AC adapter, giving users flexibility in how they set up the device. This feature proves especially useful for users who want to place the station in hard-to-reach areas where power outlets may be limited.

The Honeywell TE923W is user-friendly, featuring a simple setup process and intuitive controls. Its ability to store historical data allows users to track weather trends over time, offering valuable insights into local climate patterns.

Overall, the Honeywell TE923W is a comprehensive weather station that marries functionality with ease of use. Whether you are a weather enthusiast, a gardener, or simply someone who likes to stay informed about the conditions outside, the TE923W stands out as a reliable and informative tool for monitoring the weather. Its combination of advanced features, wireless technology, and clear display make it a valuable addition to any home or office.