FULL | Sunrise for the | FULL | Sunset on the |
| previous day |
| following day or |
|
|
| later |
- - - - | No sunrise for the | - - - - | No sunset for the |
| whole day |
| whole day |
Temperature and Humidity Window
The weather station supports up to 5 remote thermo hygrometers, corresponding to a separate channel of the temperature and relative humidity display. The temperature can be displayed in Celsius (ºC) or Fahrenheit (ºF).
The main unit carries the temperature and humidity sensor and uses this indoors data to calculate an indoors comfort level - Wet, Comfort or Dry.
The main unit can be programmed to alarm if the temperature exceeds or falls below the
Note: The temperature alarms have a 0.5 ºC deviation to prevent them from sounding due to small temperature fluctuations that are close to the set alarm value. This means that after the temperature reaches the alarm temperature, it will have to fall below the alarm temperature plus the deviation of (0.5°C) to activate the alarm.
Comfort Level Indication
The main unit is capable of detecting and displaying the current indoor comfort levels of surrounding environment. The comfort level based on the combination of the current indoor temperature and humidity readings. The following comfort levels may be displayed: COMFORT (comfortable); WET (wet) and DRY (dry).
Indicator | Temperature | Humidity | Shows current condition | |
displayed | Range | Range | ||
| ||||
COMFORT | 20°C to 25°C | 40%RH- | Ideal for both relative | |
(68°F to 77°F) | 70%RH | humidity and temperature | ||
| ||||
|
|
|
| |
WET | OVER | Contains excess moisture | ||
(23°F to122°F) | 70%RH | |||
|
| |||
|
|
|
| |
DRY | 5°C to 50°C | BELOW | Contains inadequate | |
(23°F to122°F) | 40%RH | moisture | ||
| ||||
|
|
|
|
35