Honeywell TE923W user manual Activating or Deactivating Snooze, To disable alarms

Page 32

Press ALARM/CHART button to confirm your selection

After programming is completed, the display will return to the alarm selection screen.

NOTE: Ice Warning Alarm (PRE-AL) cannot be set if weekday alarm (W) or single alarm(S) is not enabled.

Activating or Deactivating Snooze

To enable a snooze function press LIGHT/SNOOZE button.

Note: Alarm will automatically enter the snooze mode if no buttons are pressed after the alarm sounds for 2 minutes. This will occur for a maximum of three times.

To disable alarm(s):

Press ALARM/CHART button entering into a specific alarm mode and press ALARM/CHART button again to disable this alarm.

Note: For weekday alarm, pressing ALARM/CHART button will only disable the alarm for a current day. The alarm will activate again on the next day, Monday through Friday.

WWVB RADIO CONTROLLED TIME

The NIST (National Institute of Standards and Technology) radio station (WWVB) is located in Ft. Collins, Colorado. It transmits an exact time signal continuously throughout the most of the continental United States at 60 KHz frequency. The Atomic Time Clock in your weather station can receive this WWVB signal through the internal antenna from up to 2,000 miles away. Due to the nature of the Earth’s ionosphere, reception can be limited during the daylight hours. The radio controlled clock will search for an alternate station that receives the atomic time signal from the NIST Atomic clock in Boulder, Colorado.

The WWVB tower icon on the unit’s display will flash indicating a radio signal reception from the WWVB station. If the tower icon is not fully lit, or if the time and date are not set automatically, please consider the following:

During night-time hours, atmospheric disturbances are typically less severe and radio signal reception may improve. A single daily reception is sufficient enough to keep the clock accuracy within 1 second.

Make sure the unit is positioned at 8 feet (2 meters) distance from any interference source such as a TV, computer monitor, microwave, etc.

Within concrete wall rooms such as basements or office buildings, the received signal

may be weakened. Always place the main unit near the window for better reception. Once the atomic time signal is received, the date and time will be set automatically, and the [] icon will appear.

NOTE: At the time of the initial reception allow at least 24 hours for the atomic time receiver to pick up the signal. In some cases, depending on the location, it may take up to 72 hours After the clock is set manually, place the main unit by the window for the better reception. The atomic clock receiver is programmed that it will continue to search for the atomic time signal daily for every hour between 1:00 am and 4:30 am.

32

Image 32
Contents Honeywell Professional Weather Station With Remote Control TE923WPrecautions Introduction This package you will findStandard Package Contents Installation Mounting hardwareBefore you begin Ultraviolet UV SensorBattery installation Battery Compartment Holds two AA-size batteriesAssembly Mounting GroundStake WallPlacement tips Remote Thermo-Hygrometer SensorPlacement OperationRain Gauge Mounting Anemometer wind sensor Wind Cups Shaft Weather Main UnitTime Power DisplayExample 350 feet means 350 feet three hundred fifty feet HIJMain unit and handheld remote control adequate buttons Buttons and ControlsWind Button UV Button Pressure & Weather Main unit onlyUSB Port Clock and Alarm Button Initial Set UpForecast Button Rain Button Sunrise/Sunset ButtonConnecting Weather Station to a Personal Computer Clock and Alarms Window Displays Navigating through the modesPressure and Weather Forecast Window Displays UV Window DisplaysTemperature and Humidity Window Displays Sunrise/Sunset Window DisplaysRain Window Displays Wind Window DisplaysPressure and Weather Forecast Window Operations and Window SelectionCustomizing your Weather Station Accessing Pressure and Weather Forecast Window Changing or Setting Sea Level PressureProgramming Pressure & Altitude Parameters Viewing the Pressure and Altitude InformationViewing the Sea Level Pressure History Changing or Setting AltitudeViewing Pressure, Temperature and Humidity Bar Charts Understanding Weather Forecast Icons Display Accessing UV Window Resetting the UV Statistics MemorySetting Units for UV Display MED/h or UVI Time Window Manual SettingsManual Programming Programming your locationAuto-programming Clock and Calendar Modes Activating or deactivating alarmsProgramming Alarms To disable alarms Activating or Deactivating SnoozeSunrise/Sunset Window Accessing Sunrise/Sunset WindowIcon Programming Latitude, Longitude, Time Zone and DST Viewing Location DataViewing Sunrise/Sunset Times for Different Dates Understanding of Sunrise/Sunset InformationTemperature and Humidity Window Indicator Temperature Humidity Shows current conditionComfort Level Indication RangeProgramming Temperature in Celsius or Fahrenheit Accessing Temperature and Humidity ModeViewing Remote Channel Temperature and Humidity Resetting Remote Temperature and Humidity Memory All Remote Sensor Signals Search ActivationAccessing Rain Window Remote Sensor StatusResetting the Rainfall Statistics Memory Activating or Deactivating Rain AlarmProgramming Daily Rainfall Alarm Accessing Wind ModeResetting Wind Statistics Memory Programming High Wind AlarmOperating Wind Window Programming Wind Speed UnitsMaintenance Troubleshooting Issue source Symptom SolutionPage Appendix City Codes US and Canadian CitiesBCN Specifications Humidity Indoor Humidity OutdoorSunrise and Sunset Ultraviolet lightDimensions Battery life alkalineWeight without batteries Declaration of Conformity
Related manuals
Manual 46 pages 6.67 Kb

TE923W specifications

The Honeywell TE923W is a sophisticated weather station that provides users with real-time data and insights into weather conditions. This versatile device combines advanced technology with user-friendly features, making it an essential tool for anyone interested in tracking and understanding weather patterns.

One of the main features of the TE923W is its ability to deliver accurate weather forecasts. The station uses a combination of sensors to monitor various environmental factors, including temperature, humidity, wind speed, and rainfall. This information is processed to provide reliable forecasts for up to 12 hours ahead, allowing users to plan their activities accordingly.

The TE923W boasts a large, easy-to-read LCD display that shows a wealth of data at a glance. Users can view current indoor and outdoor temperatures, humidity levels, and atmospheric pressure. Additionally, the display features weather icons that represent the current weather conditions, making it simple for users to interpret the data visually.

Another standout characteristic of the Honeywell TE923W is its wireless connectivity. The device includes a wireless outdoor sensor that can transmit data from up to 330 feet away. This means users can place the sensor outside, where it can accurately measure outdoor conditions without being tethered by wires. The wireless connection also allows users to position their weather station in an ideal location for optimal readings.

In terms of power, the TE923W is designed for convenience. It can be powered using either batteries or an AC adapter, giving users flexibility in how they set up the device. This feature proves especially useful for users who want to place the station in hard-to-reach areas where power outlets may be limited.

The Honeywell TE923W is user-friendly, featuring a simple setup process and intuitive controls. Its ability to store historical data allows users to track weather trends over time, offering valuable insights into local climate patterns.

Overall, the Honeywell TE923W is a comprehensive weather station that marries functionality with ease of use. Whether you are a weather enthusiast, a gardener, or simply someone who likes to stay informed about the conditions outside, the TE923W stands out as a reliable and informative tool for monitoring the weather. Its combination of advanced features, wireless technology, and clear display make it a valuable addition to any home or office.