Accessing Temperature and Humidity Mode
From the main unit: Press UP or DOWN until the IN icon 
on the upper right will flash.
From the remote control: Press
.
Viewing Remote (Channel) Temperature and Humidity
Static Display:
In Temperature and Humidity Window, press the CHANNEL button every time to recall a different channel.
Channel
To enable automatic scan of the different channels, press and hold CHANNEL button, until the 3 icon is displayed. Each valid channel will be alternately displayed with a 5 seconds delay.
NOTE: The channel
Recalling Temperature and Dew Point Information
In Temperature and Humidity Window press SET button recalling either:
•Temperature and relative humidity
•Dew point and relative humidity
Programming Temperature in Celsius or Fahrenheit
In Temperature and Humidity Window, press and hold SET button to toggle the temperature in Celsius (ºC) or Fahrenheit (ºF).
Activating/Deactivating Alarms
In Temperature and Humidity Window, press the ALARM/CHART button to recall a current temperature for the corresponding channel, the upper temperature alert with ▲icon (if disabled, displays OFF), or lower temperature alert with ▼ icon (if disabled, displays OFF).
Once the above alerts are displayed, press the UP or DOWN arrow button to enable or disable the corresponding alert.
Programming Alarms
•In the Temperature and Humidity Window, press ALARM/CHART button selecting the desired alarm.
•Press and hold ALARM/CHART button until the remote temperature and ▲or ▼ icon starts flashing.
•Adjust the temperature digits for the Temperature Alarm using the UP or DOWN arrow button. Press and hold either button for fast digits advance
•Press the ALARM/CHART button to confirm selection and return to the temperature
36