La Crosse Technology WS-7391U instruction manual Setting the Day, Date and Year

Note: Some locations (Arizona and parts of Indiana) do not follow Daylight Saving Time.

5.Press and release the “SET” button to confirm and advance to the Date setting mode (skip step 1and 2 in section V if continuing).

V.Setting the Day, Date and Year

Note: This is only necessary if you do not wish to wait for the WWVB reception. All manual set data will be over-ridden by the reception of the WWVB signal based on the time zone selected.

1.Press and hold the “SET” button for 2 seconds or until “12h” or “24h” flashes.

2.Press the “SET” button 5 more times to reach the day of the week setting mode.

3.The two-digit day of the week is flashing (SU is the default or factory setting).

4.Press and release the “+” button to advance to the correct day.

5.Press and release the “SET” key to confirm the day of the week setting and to shift to month setting.

6.Press and release the “+” button to advance to the correct month.

7.Press and release the “SET” key to confirm the month and advance to the date setting.

8.Press and release the “+” key to advance to the correct date.

9.Press and release the “SET” key to confirm the date setting and to advance to the year setting.

10.Press and release the “+” key to advance to the correct year.

12