La Crosse Technology WS-7391U instruction manual

Page 6

To complete the set up of your indoor weather station after the 10 minutes have passed please follow the steps in the Detailed Set Up Guide

.

Note: The remote thermo/hygro sensor transmits a signal every 3 minutes; after the batteries have been installed, the indoor weather station will search for the signal for a duration of 5 minutes. If there is no temperature reading in the OUTDOOR LCD after 5 minutes, make sure the units are within range of each other, or repeat the battery installation procedure.

6

Image 6

Contents WS-7391U Wireless 433 MHz Radio-controlled Weather Station Table of Contents Inventory of Contents About Wwvb Quick SET-UP Guide Do not Press ANY Buttons for 10 MinutesPage Detailed SET-UP Guide Battery Installation Remote Thermo/hygro SensorIndoor Weather Station Program Mode Time and DateManually performed throughout the programming mode Function Keys12/24-Hour Time Format II. Time Setting III. Time Zone SettingIV. Daylight Saving Time DST Setting HAWSetting the Day, Date and Year VII. Setting the LCD Contrast VI. Selecting F or CFeatures of the WS-7391U Weather ForecastWeather Icons Weather Tendency Arrows III. Outdoor Temperature and Humidity Resetting the Minimum and Maximum RecordsAdding Additional Remote Sensors Optional VI. Set-up of Multiple UnitsVII. Viewing and Operating with Multiple Remote Sensors Outdoor LCDPage Mounting With Adhesive Tape Indoor Weather Station Troubleshooting Problem SolutionMaintenance and Care Instructions SpecificationsWarranty Information Page Support@lacrossetechnology.com