La Crosse Technology WS-7391U instruction manual Indoor Weather Station

Page 21

2.The Indoor Weather Station

1.The WS-7391U is a wall mount only indoor weather station. To mount the display on your wall:

2.Fix a screw (not included) into the desired wall, leaving approximately 3/16 of an inch (5mm) extended from the wall.

3.Place the indoor weather station onto the screw using the hanging hole on the backside.

4.Gently pull the indoor weather station down to lock the screw into place.

21

Image 21

Contents WS-7391U Wireless 433 MHz Radio-controlled Weather Station Table of Contents Inventory of Contents About Wwvb Do not Press ANY Buttons for 10 Minutes Quick SET-UP GuidePage Detailed SET-UP Guide Battery Installation Remote Thermo/hygro SensorIndoor Weather Station Time and Date Program ModeManually performed throughout the programming mode Function Keys12/24-Hour Time Format III. Time Zone Setting II. Time SettingHAW IV. Daylight Saving Time DST SettingSetting the Day, Date and Year VI. Selecting F or C VII. Setting the LCD ContrastFeatures of the WS-7391U Weather ForecastWeather Icons Weather Tendency Arrows Resetting the Minimum and Maximum Records III. Outdoor Temperature and HumidityVI. Set-up of Multiple Units Adding Additional Remote Sensors OptionalOutdoor LCD VII. Viewing and Operating with Multiple Remote SensorsPage Mounting With Adhesive Tape Indoor Weather Station Solution Troubleshooting ProblemSpecifications Maintenance and Care InstructionsWarranty Information Page Support@lacrossetechnology.com