La Crosse Technology WS-7395U instruction manual VII or 24 Hour Time Setting, VIII. Time Setting

Page 8

VII. 12 OR 24 HOUR TIME SETTING

1. Press and hold the SET button for 5 seconds.

2. “LCD” will show in the TIME LCD and the number setting will flash.

3. Press and release the SET button four times.

4.“12h” or “24h” will flash in the DATE LCD.

5. Press and release the ALM/+ button to select 12 or 24-hour time format.

Note: When in the 12-hour format “P.M.” will appear to the left of the hour in the time LCD between the hours of noon and midnight.

6.Press and release the SET button to confirm and advance to the time setting.

VIII. TIME SETTING

There are two methods by which the time and date can be set:

A)Automatically via WWVB reception, or

B)Manually.

A. WWVB (Remote Control Time)

This method requires you to do nothing, except wait for the signal to be received, and to select a time zone. Reception usually takes approximately 10 minutes during optimal conditions. The best conditions for reception is at night, between midnight and 6:00 am—when there is less atmospheric interference. To keep your time as accurate as possible, the indoor weather station conducts a WWVB search every night between these hours, and overrides any manually set time. The WWVB tower icon (appearing in the TIME LCD) will flash when a signal-search is in progress and a signal is being received, and will remain steady when the signal has been received. If the WWVB time has not been received after 10 minutes of battery installation, you may manually set the time or leave the time function alone (reception will occur regardless).

B. MANUAL TIME SETTING

Note: When in the 12-hour format “P.M.” will appear to the left of the hour in the time LCD between the hours of noon and midnight.

Note: Reception of the WWVB signal will automatically set the time. The reception of the signal will override any programmed time.

1.Press and hold the SET button for 5 seconds.

2. “LCD” will show in the TIME LCD and the number setting will flash.

3. Press and release the SET button five times.

4. The hours digits will flash in the TIME LCD.

5. Press and release the ALM/+ button to advance the hours.

6. Press and release the SET button to confirm the hours setting and advance to the minutes setting.

7. The minutes digits will flash in the TIME LCD.

8.Press and release the ALM/+ button to advance the minutes.

9.Press and release the SET button to confirm and advance to the year setting.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents WS-7395U Table of Contents Inventory of Contents Quick SET-UP Guide Important Notes on Set-up and OperationIndoor Weather Station Detailed SET-UP Guide Battery InstallationRemote TEMPERATURE/HUMIDITY Sensor Program Mode Programming Sequence and Default SettingsIII. Setting the LCD Contrast II. Function KeysVI. RADIO-CONTROLLED Time ON/OFF Setting IV. Time Zone SettingDaylight Saving Time DST Setting VII or 24 Hour Time Setting VIII. Time SettingWwvb Remote Control Time Manual Time SettingXI. Selecting F or C IX. Setting the YEAR, DAY and MonthSetting the Snooze XII. Setting the Forecast Sensitivity Features of the WS-7395UIII. Outdoor Temperature and Humidity IV. Minimum and Maximum Temperature RecordsViewing the Indoor Temperature Records Weather ForecastViewing the Outdoor Temperature Records Resetting the Mimimum and Maximum RecordsVII. Wind SPEED, Wind CHILL, Minimum and Maximum Values Moon PhaseVI. Viewing the CURRENT, Maximum and Minumum DEW Point VIII.BEAUFORT Scale Wind Speed Mph IX. Time Alarm MountingMounting with Nylon Straps Mounting with ScrewsMounting with Adhesive Tape II. the Remote Wind Speed Sensor III. the Indoor Weather StationTroubleshooting Maintenance and Care InstructionsSpecifications Weather data measuring rangeWeather data checking interval Power SupplyDimensions H x W x D FCC Disclaimer
Top Page Image Contents