Davis Instruments 6152C manual Setting Alarms, UV Dose

Page 32

Alarm Mode

The time alarm is a standard “alarm clock” alarm. It sounds for one minute at the set time. Make sure you choose AM or PM, if you’re in 12-hour mode.

UV Dose

The UV dose alarm sounds when the accumulated UV dose has exceeded the dose you set. The UV dose alarm does not arm unless the initial UV dose for the day has been reset. Once the UV dose alarm value is set, clear the accumulated UV dose. See “Clear- ing Weather Variables” on page 26.

Setting Alarms

1.Press ALARM to enter the Alarm Mode to view or set the high alarm thresholds. The screen displays the current high alarm thresholds. The ALARM and HIGHS icons also appear.

2.Press the < and > keys to select one of the variables displayed on the screen or use the console keys to select any weather variable. Also, press HI/LOW to display the toggle between the high and low alarm threshold settings.

3.Press 2ND then press ALARM to activate the currently selected weather variable.

4.Press the < and > keys to select digits in the threshold value.

5.Press the + and - keys to change the digit’s value up and down.

6.Press DONE to finish changing the alarm setting.

7.Repeat steps 3 through 6 to change additional alarm settings.

8.Press DONE to exit Alarm Mode.

29

Image 32

Contents Vantage Pro2 Console Manual Vantage Pro2 Console Display Features Display FeaturesFCC Part 15 Class B Registration Warning EC EMC ComplianceTable of Contents Keyboard & Display Console FeaturesChapter Welcome to Vantage Pro2TM Vantage Pro2 Options Console ModesOptional Sensors & Transmitting Stations Optional WeatherLink SoftwareOptional Accessories Envoys Wireless Weather Envoy #6316, Envoy8X #6318Chapter Installing the Console Powering the ConsoleInstalling the AC Power Adapter Wireless Vantage Pro2 StationsInstalling Batteries Connecting Cabled StationsTable & Shelf Placement Console LocationConsole Location Wall Mounting Chapter Using Your Weather Station Setup ModeSetup Mode Commands Mode DescriptionStation Type Maximum Number Screen 2 Configuring Transmitter IDs Wireless OnlyScreen 1 Active Transmitters Screen 3 Retransmit Wireless Only Screen 4 Time & Date Screen 5 and Screen 6 Latitude and LongitudeScreen 7 Time Zone Screen 10 Elevation Screen 8 Daylight Saving SettingsScreen 9 Daylight Saving Status Screen 11 Wind Cup Size Screen 12 Rain Collector Screen 13 Rain SeasonClear All Command Screen 14 Serial Baud RateSelecting Weather Variables Current Weather ModeSelecting Units of Measure Outside and Inside Temperature Wind Speed and DirectionHumidity Wind ChillDew Point Barometric PressureUV Ultraviolet Radiation Thsw IndexRain Rate Month-to-date precipitationYear-to-date precipitation Daily RainSolar Radiation Current Evapotranspiration ETMonthly Evapotranspiration ET Yearly Evapotranspiration ETDisplaying Time & Date or Sunrise & Sunset Displaying the ForecastForecast Icons Calibrating, Setting, and Clearing Variables Calibrating Temperature And HumidityCalibrate Wind Direction Reading Calibrating Barometric PressureSetting Weather Variables Clearing Weather VariablesHighs and Lows Mode Viewing Highs and LowsAlarm Mode Four Special AlarmsET Evapotranspiration Barometric PressureSetting Alarms UV DoseSetting the Time Alarm Variable AlarmsGraph Mode Clearing Alarm SettingsSilencing Alarms Viewing GraphsHighs Vantage Pro2 Console Graphs Weather Variable Available GraphsChapter Troubleshooting and Maintenance Vantage Pro2 Troubleshooting GuideSpeed WindHeat Troubleshooting Reception ProblemsTime Check Console Reception Console Diagnostic ModeDiagnostic Screen Commands Screen 1 Statistical Diagnostic Screen Screen 1 Statistical Diagnostics ScreenScreen 2 Reception Diagnostic Screen Console Firmware Versions Changing Batteries Console MaintenanceOne Year Limited Warranty Temperature Apparent TemperaturesAppendix a Weather Data Wind chillTemperature/Humidity/Sun/Wind Thsw Index HumidityDew Point RainUV Ultra Violet Radiation Barometric PressureSolar Radiation Skin Phototype Skin Color Tanning & Sunburn history UV MEDsUV Index UV Dose thatCauses Sunburn Soil Moisture Evapotranspiration ETLeaf Wetness Wireless Communication Specifications Appendix B SpecificationsConsole Specifications Console Data Display Specifications Weather Data Specifications SensorsVariable Required Resolution Range Nominal Sensors Appendix C Wireless Repeater Configuration Verifying SetupClearing Repeater ID Vantage Pro2 Console Icons Contacting Davis Technical Support