Davis Instruments 6152C manual Setting the Time Alarm, Variable Alarms

Alarm Mode

Vantage Pro2 Station AlarmsVantage Pro2 Station Alarms

Variable	Alarms
Barometric Pressure Trend	Storm Warning - uses trend value falling rate
	Storm Clearing - uses trend value rising rate
Evapotranspiration	ET Alarm - uses total ET for the day
Humidity, Inside	High and Low
Humidity, Outside	High and Low
Dew Point	High and Low
Leaf Wetness	High and Low
Rain	Flash Flood Alarm - uses current 15 minute rainfall total
	24 Hour Rain Alarm - uses current 24 hour rainfall total
Storm	Storm Alarm - uses current storm rainfall total
Rain Rate	High
Soil Moisture	High and Low
Solar Radiation	High
Inside Temperature	High and Low
Outside Temperature	High and Low
Extra Temperature	High and Low
Heat Index Temperature	High
THSW Index Temperature	High
Wind Chill Temperature	Low
UV Radiation Index	High
UV Radiation MED	High - uses the current total if variable has been reset
Wind Speed	High
Time & Date	Yes - the alarm sounds for 1 minute.

Setting the Time Alarm

1.Press ALARM to enter alarm mode. The ALARM and HIGHS icons appear.

2.Press 2ND, then press TIME, then press 2ND again, and then press ALARM. The time field begins blinking.

3.Press the < and > keys to select hours, minutes, or AM/PM.

4.Press + and - keys to change the digit’s value up and down.

5.Press DONE to exit Alarm Mode.

30