51 & 52 Series II
Using the Thermometer
Using the Thermometer
1.Plug the thermocouple(s) into the input connector(s).
2.Press Ato turn on the thermometer.
After 1 second the thermometer displays the first reading. If no thermocouple is plugged into the selected input or the thermocouple is "open," the display shows "- - -
Entering or Exiting Setup
When the thermometer is in Setup mode, the display shows s.
∙Press Dto start or exit Setup.
Setup Options
| Menu |
|
Option | Item | Settings |
Changing Setup Options
Use Setup to change the thermocouple type, offset, sleep mode, and line frequency settings.
The thermometer stores the settings in its memory. Setup settings reset only when the batteries are removed for more than 2 minutes.
Thermocouple Type
Offset
Sleep Mode
Line Frequency
TYPE
O
SLP
Li ne
J, K, T, or E
T1 or T2 (Model 52)
on (sleep mode on) or 0FF (sleep mode off)
50 H (50 Hz) or 60 H (60 Hz)
9