Athena Technologies L, OTC25 N Input Source Temperature Sensor, Output Source Power to Heater

Page 18

Technical

Specifications

Input Source (Temperature Sensor)

 

 

Thermocouple Range:

Type J

OTC25 N/L:

6 to 926° F

 

 

(-14 to 496° C)

 

OTC25 P:

32 to 999° F

 

 

(0 to 537° C)

Type K

OTC25 N/L:

N/A

 

OTC25 P:

0 to 999° F

 

 

(-17 to 537° C)

Output Source (Power to Heater)

Solid-State Relay (Output 1) 120/250 Vac, Zero-Voltage Switched, 2 A Continuous/ 10 A Surge @ 25° C

Solid-State Relay (Output 2) 120/250 Vac, Zero-Voltage Switched, 0.5 A Continuous/ 10 A Surge @ 25° C

Electromechanical Relay 5 A, 250 Vac/5 A, 30 Vdc Max Switching Capacity, 150 W

15

Image 18
Contents Series OTC25 N/L/P Nema 4X Front Bezel, Splash-Proof and Resistant to Dust Features SafetyIntroduction Approvals UR, cUR, CEContents Installation Pre-Installation InstructionsMounting Power On WiringAthena Series OTC25 Digital Temperature Controller When power is first applied to the OTC25, all segmentsControl Hysteresis Default DisplayParameter Descriptions Display OffsetOTC25 N On/Off Temperature Controller Normal Operation Parameter ConfigurationOTC25 L Limit Controller Normal Operation Deviation Band AlarmParameter Key momentarily to switch the display to Limit Display UnitsAutomatic Startup Reset Limit SetpointOTC25 P PID Temperature Controller Normal Operation Parameter Key momentarily to switch the display toOTC25 P Operation Proportional Band ResetOutput 2 Configuration RateCalibration Procedure CalibrationCalibration Calibration Error Codes Repeat for the upper reference pointWarranty/Repair Information Two-Year Limited WarrantyBUYER’S Remedy is Limited to Either i Repair or Unit Repairs Operating Limits Technical SpecificationsControl Characteristics Sensor RangeInput Source Temperature Sensor Output Source Power to HeaterPage OTC25-NOTC25-POTC25-L Page OTC25-NOTC25-POTC25-L Page For technical assistance, call toll free