Acu-Rite 1010 instruction manual Select Measurement Units

Page 10

Select Measurement Units

To select between standard units (mph, ºF, etc.) or metric units (kph, ºC, etc.):

1.Press the “▲” or “▼” buttons until “SET UNITS?” is displayed on the Selectable Category part of the display unit.

2.Press the “SET” button to set the unit preference.

3.Press the “▲” or “▼” to select “STAND” for standard or “METRIC” for metric units.

4.Press the “SET” button to confirm your selection.

5.Next, you will see “WIND MPH”. Press the

“▲” or “▼” to select MPH, KPH, or KNOTS for wind speed units.

6.Press the “SET” button to confirm your selection.

Units are now set.

Image 10

Contents Professional Weather Center Package Contents Unpacking InstructionsFeatures & Benefits Display Unit Clock Outdoor Sensor Signal Strength Alarm On/Off Indicator Wind Speed Alarm On Indicator Average Wind SpeedStorm Alert Alarm On Indicator Weather Select Programmable Alarm Settings Alarm On/Off ButtonBack of Display Unit ResetBattery Compartment Battery Compartment Cover Clear TodayInstall or Replace Batteries In-1 Sensor SetupSet the A-B-C Switch Remove Rain Gauge StabilizerDisplay Unit Setup Set the Time Set the Time & DateSet the Date Select Measurement Units Display Unit Placement Placement for Maximum AccuracyImportant Placement Guidelines In-1 Sensor PlacementIn-1 Sensor Installation In-1 Sensor Installation GuidelinesBasic Setup is Complete Clear Data Collected During InstallationWeather Select Using the Professional Weather Center Learning ModeWeather Forecast Barometric PressureProgrammable Weather Alarms Set a Weather Alarm Silence a Sounding AlarmProblem Possible Solution TroubleshootingReception Temperature or Display Unit Care Care & MaintenanceCalibration Calibrate Temperature & Humidity In-1 Sensor CareCalibrate the Rain Gauge TipsSpecifications FCC InformationLimited One Year Warranty Customer SupportPage Page It’s More than Accurate, it’s