Set a Weather Alarm
1.Choose the weather category for which you wish to set an alarm by pressing the “▲” or “▼” buttons until the category is displayed on the Selectable Category part of the display unit.
2.To program a value (only applies to alarms that require a value), press AND HOLD the “
” button until the “SET” indicator appears in the area of the display labeled “ALARM” (left of the selected weather category) and the alarm setting flashes.
3.Adjust the alarm value by pressing the “▲” or “▼” buttons.
4.Press the “SET” button to confirm a value.
5.Next, press the “
” button to activate the alarm. The alarm ON indicator will highlight on the display.
Alarm is now programmed and turned on.
To set or adjust an alarm value:
Press and hold “
”
To activate or deactivate an alarm:
Press “
”
Silence a Sounding Alarm
The alarm sounds initially for a few minutes, then silences itself. The alarm then sounds every few minutes afterwards until one of the following happens:
1.“SNOOZE” - Press any button. Alarm silences, but sounds again if the alarm condition reoccurs.
2.Turn the alarm “OFF” - Deactivates the alarm.
15