Maintenance & Adjustments

Maintenance

General Recommendations

•Always observe safety rules when performing any maintenance.

•The warranty on this chipper shredder does not cover items that have been subjected to operator abuse or negligence. To receive full value from warranty, operator must maintain the equipment as instructed here.

•Changing of engine-governed speed will void engine warranty.

•All adjustments should be checked at least once each season.

•Periodically check all fasteners and make sure these are tight.

WARNING: Always stop engine, disconnect spark plug, and ground against engine before, cleaning, lubricating, or performing any type of maintenance on your machine.

Lubrication

1.Lubricate the chipper chute hinge with a light oil once a season.

2.Lubricate the pivot points on the chute deflector with light oil once a season.

3.Follow the separate engine manual packed with your unit for engine lubrication instructions.

Equipment Care

•Clean the chipper shredder thoroughly after each use.

•Wash bag periodically with water. Allow to dry thoroughly in shade.

•If the reduction chamber becomes clogged, remove and clean as instructed below.

•Allow the unit to run and clear out all debris for a short time before shutting the unit down before storage.

NOTE: Cleaning with a forceful spray of water is not recommended as it could contaminate the fuel system.

Engine Care

Refer to the Maintenance section of the Engine Owner/ Operator manual packed with your unit. Read and follow instructions carefully.

•Check engine oil level before each use as instructed in the separate engine manual.

Note: When draining or changing the oil: a 90 degree elbow has been installed on the engine’s oil drain to facilitate the oil change process. This oil drain elbow passes through a hole in frame. The oil is drained from below the frame. With this in mind, follow the Engine

Owner/ Operator manual packed with your unit for oil change instructions.

•Clean or replace air cleaner every 25 hours under normal conditions. Clean every few hours under extremely dusty conditions. To service the air cleaner, refer to the engine manual.

•The spark plug should be cleaned and the gap reset once a season. Check engine manual for correct plug type and gap specifications.

•Clean engine regularly with a cloth or brush. Keep the top of the engine clean to permit proper air circulation. Remove all grass, dirt, and combustible debris from muffler area.

CS 2210, CS3210 specifications

Cub Cadet has earned a reputation in the lawn care and outdoor power equipment market for producing reliable and high-performance machinery. The Cub Cadet CS3210 and CS2210 models are no exception, standing out as premier options for both residential and commercial users seeking versatility and efficiency in their operations.

The CS3210 is equipped with a powerful 31-horsepower Kohler engine, delivering exceptional performance and reliability. This engine is designed to handle various mowing conditions, making it suitable for handling both thick grass and uneven terrain. The CS2210, while slightly smaller, boasts a strong 22-horsepower engine that efficiently manages medium-sized yards without compromising performance.

A standout feature of both models is their advanced hydrostatic transmission, which allows for smooth, effortless driving. This system enhances user comfort, especially during extended mowing sessions, by providing seamless shifting and superior maneuverability. Users will appreciate the easy-to-use foot-operated controls that allow for precise speed adjustments.

Both the CS3210 and CS2210 come with a durable, reinforced cutting deck, which ensures a clean cut and improved grass mulching. The cutting deck features a stamped design that enhances airflow, promoting better clippings distribution. With adjustable cutting heights, users can customize their mowing experience to achieve a tailored finish that suits their lawn preferences.

In addition to mowing, these models offer flexibility for various lawn care tasks. They can be equipped with a variety of attachments, including baggers, snow throwers, and tillers, transforming them into multi-functional machines capable of handling seasonal chores and yard work.

Safety is a top priority with both the CS3210 and CS2210. Each model is designed with user-friendly controls and features such as a safety switch that prevents accidental starts, enhancing the overall user experience while ensuring peace of mind.

Overall, the Cub Cadet CS3210 and CS2210 are robust, reliable, and versatile lawn tractors designed to tackle a range of outdoor tasks. With their powerful engines, advanced transmissions, and durable construction, they represent a solid investment for anyone looking to maintain their lawn efficiently. Whether you're a homeowner or a professional landscaper, these models provide the features and technology necessary to achieve top-notch results.