Cub Cadet CS 2210, CS3210 Important Safe Operation Practices, California Proposition Training

Page 3

Important Safe Operation Practices

2

WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury.

When you see this symbol. HEED ITS WARNING!

California Proposition 65

WARNING: Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the safe operation practices in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating fingers, hands, toes and feet and throwing debris. Failure to observe the following safety instructions could result in serious injury or death.

Training

1.Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

3.Never allow children under 16 years of age to operate this machine. Children 16 and over should read and understand the instructions and safe operation practices in this manual and on the machine and be trained and supervised by an adult.

4.Never allow adults to operate this machine without proper instruction.

5.Keep bystanders, pets, and children at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

6.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

7.Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

8.Never attempt to unclog either the feed intake or discharge opening, remove or empty bag, or inspect and repair the machine while the engine is running. Shut the engine off and wait until all moving parts have come to a complete stop. Disconnect the spark plug wire and ground it against the engine.

Preparation

1.Thoroughly inspect the area where the equipment is to be used. Remove all rocks, bottles, cans, or other foreign objects which could be picked up or thrown and cause personal injury or damage to the machine.

2.Always wear safety glasses or safety goggles during operation and while performing an adjustment or repair, to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.

3.Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts. Loose fitting clothes or jewelry can be caught in movable parts. Never operate this machine in bare feet or sandals. Wear leather work gloves when feeding material in the chipper chute.

4.Before starting, check all bolts and screws for proper tightness to be sure the machine is in safe working condition. Also, visually inspect machine for any damage at frequent intervals.

5.Maintain or replace safety and instructions labels, as necessary.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operator’s Manual Record Product Information Table of ContentsTo The Owner Thank YouImportant Safe Operation Practices California Proposition TrainingPreparation Maintenance & Storage OperationSafe Handling of Gasoline Spark Arrestor Do not modify engineSymbol Safety SymbolsAssembly & Set-Up Contents of CartonAssembly Set-Up Tow BarGas and Oil Fill-Up Controls and Features Stopping Engine Basic Starting ProcedureOperation Starting EngineEmptying the Bag ShreddingClearing the Hopper ChippingMaintenance Maintenance & AdjustmentsCleaning The Reduction Chamber Shredder Blade ServiceBlade Care Chipper BladesOff-Season Storage Problem Cause Remedy TroubleshootingPage Page Page Chipper Blade Replacement PartsComponent Part Number and Description Shredder BladeCUB Cadet LLC MANUFACTURER’S Limited Warranty for Manual del operador Asistencia al Cliente Al propietarioGracias Registro de información de productoPreparativos Medidas importantes de seguridadProposición 65 de California CapacitaciónManejo seguro de la gasolina OperaciónUtilice sólo recipientes para gasolina autorizados Guardachispas Mantenimiento y almacenamientoNo modifique el motor Aviso referido a emisionesSímbolo Símbolos De SeguridadBolsa Montaje y ConfiguraciónContenido de la caja MontajeInserte la lengua en la base ConfiguraciònBarra de Remolque Llenado de gasolina y aceiteControles Y Características Funcionamiento Encendido del MotorDetención del motor Vaciado de la bolsa TrituraciónLimpieza de la tolva CorteCare de Equipo MantenimientoRecomendaciones Generales LubricaciónLimpie la cámara de reducción Limpieza del canal de reducciónLa cuchilla de la trituradora ServicioCuidado de la Cuchilla Las cuchillas de la cortadoraAlmacenamiento Fuera de Temporada Problema Causa Remedio Solución de problemasDescarga La unidad no descarga El área de descarga está tapadaEl cable de la bujía. Limpie la pantalla de Desgranado y el interior de la abertura deComponente Número de pieza y Descripción Piezas de ReemplazoGarantía Limitada DE CUB Cadet LLC

CS 2210, CS3210 specifications

Cub Cadet has earned a reputation in the lawn care and outdoor power equipment market for producing reliable and high-performance machinery. The Cub Cadet CS3210 and CS2210 models are no exception, standing out as premier options for both residential and commercial users seeking versatility and efficiency in their operations.

The CS3210 is equipped with a powerful 31-horsepower Kohler engine, delivering exceptional performance and reliability. This engine is designed to handle various mowing conditions, making it suitable for handling both thick grass and uneven terrain. The CS2210, while slightly smaller, boasts a strong 22-horsepower engine that efficiently manages medium-sized yards without compromising performance.

A standout feature of both models is their advanced hydrostatic transmission, which allows for smooth, effortless driving. This system enhances user comfort, especially during extended mowing sessions, by providing seamless shifting and superior maneuverability. Users will appreciate the easy-to-use foot-operated controls that allow for precise speed adjustments.

Both the CS3210 and CS2210 come with a durable, reinforced cutting deck, which ensures a clean cut and improved grass mulching. The cutting deck features a stamped design that enhances airflow, promoting better clippings distribution. With adjustable cutting heights, users can customize their mowing experience to achieve a tailored finish that suits their lawn preferences.

In addition to mowing, these models offer flexibility for various lawn care tasks. They can be equipped with a variety of attachments, including baggers, snow throwers, and tillers, transforming them into multi-functional machines capable of handling seasonal chores and yard work.

Safety is a top priority with both the CS3210 and CS2210. Each model is designed with user-friendly controls and features such as a safety switch that prevents accidental starts, enhancing the overall user experience while ensuring peace of mind.

Overall, the Cub Cadet CS3210 and CS2210 are robust, reliable, and versatile lawn tractors designed to tackle a range of outdoor tasks. With their powerful engines, advanced transmissions, and durable construction, they represent a solid investment for anyone looking to maintain their lawn efficiently. Whether you're a homeowner or a professional landscaper, these models provide the features and technology necessary to achieve top-notch results.
Top Page Image Contents