Cub Cadet Z - Wing 48 service manual Changing a Blade, Changing the Blade Drive Belts

Page 15

Figure. 5

f.Remove three hairpins from the deck (See Fig. 5). Remove the (2) hairpins on the left and right rear side of the cutter deck, and

(1) hairpin from the front of the deck.

g.Turn front caster wheels outward.

h.Shift the deck toward the operator’s left side of the mower and remove.

i.To install reverse the process.

2.Changing a Blade:

a.Remove the Key from the ignition and dis- connect the spark plug and set the parkng brake.

b.Jack up the front of the mowing deck about one foot and block it in that position.

c.Use a 1-1/8" socket wrench on the pulley side of the spindle to secure the blade bolt.

d.Remove the hex nut using a 1-1/8" wrench or socket.

e.Remove the blade assembly from the bolt.

f.The pivot blades are attached to the blade assembly with grade 8 shoulder bolts. To remove the blades hold the head of the bolt with a 3/4” wrench or socket and rem- move the nut with a 9/16” wrench or socket. Replace the 9/16” locknuts and the grade 8 shoulder bolts, and apply locktite 262, or equivalent to the threads.

WARNING:

Never mow with dull blades! Blades that are bent should be replaced! The cutting blades are sharp and can cause severe injury. Wrap the cutting surface of the blade with a rag to avoid injury.

g.Clean any debris from the blades. Keep blades sharp and free of build up at all times.

Hair Pins

h.Sharpen the pivot blades as part of the blade assembly, so that the balance of the assembly can be checked. Sharpen blades evenly at the original 30° angle to maintain balanced cutting blades. Do not sharpen the underside of the blades. Use a electric blade sharpener, a conventional electric grinder or a hand file to sharpen the blades.

i.Replace any blade with severe nicks or dents that cannot be removed by filing.

j.Check the balance of the blade assembly after sharpening by placing it on a blade balancer. Do not use un-balanced blades.

k.If the blade dips on one end, file stock off of the cutting surface on that end.

l.To replace the blade reverse the above process and tighten 1-1/8” nut to 100-120 lb ft. and the 9/16” nuts to 35-40 lb ft.

Note: Blade assemblies that cannot be eas- ily balanced—REPLACE. Replace 9/16” lock nuts if the pivot blades are removed from the assembly

3.Changing the Blade Drive Belts:

a.Set the parking brake. Remove ignition key and both spark plug caps.

b.Unscrew the wing nuts from the deck cov- ers and remove both covers.

c.Using a 1/2" socket breaker bar or socket rachet insert the male end into the 1/2" opening in the lower idler arm assembly and pull the idler arm clockwise. While holding the idler arm back, loosen the blade drive belt from the pulley and slide the belt away from the pulley.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Hydrostatic Zero-Turn Commercial Riding Mower Table of Contents Forward General Safety Operations Safety PrecautionsGeneral Related to Fuel When MowingShield Missing Do not Operate Safety Decals and LabelsSpecifications When Mowing Safety Awareness when MowingOperating Instructions To Mow Grass and Produce a Striped Pat- tern Deck Lift Handle Zero Turn Break-In And Operating Procedures Initial AdjustmentsPage Start the Engine Removing the Mower Deck Maintenance ServiceMower Deck Parking the MowerChanging the Blade Drive Belts Changing a BladeAdding Hydraulic Oil 5W40 full synthetic Changing the Spindle AssemblyStop the engine and remove the key from the ignition switch Hydraulic OilSpecific Gravity Freezing Temp F Battery RemovalInstalling the Battery Electrical CircuitPage Inflation Pressure TiresBrakes Hydraulic SystemHydraulic Oil Tank and Filter Storage Maintenance Schedule If Mower is so equipped OIL ChartEnginge RPM Check and Adjustment High Speed Tracking AdjustmentDeck Corner Ball Wheel Roller Settings Deck Center Anti-Scalp Roller SettingsLap Bar Adjustment Deck lift cable adjustment Procedure Deck leveling ProcedurePage Wiring Diagram Gaugeslope Maintenance Record Maintenance Record MANUFACTURER’S Limited Warranty Turf Equipment

Z - Wing 48 specifications

The Cub Cadet Z-Wing 48 is a premium zero-turn mower designed for both professional landscapers and homeowners who take their lawn care seriously. This innovative machine combines power, precision, and efficiency, making it an ideal choice for tackling large areas with ease and speed.

One of the standout features of the Z-Wing 48 is its unique wing-style deck, which allows for a wider cutting path than traditional zero-turn mowers. The mower boasts a versatile 48-inch cutting deck that provides exceptional maneuverability in tight spaces while still delivering a wide cut for larger open areas. This dual capability makes it perfect for navigating around flower beds, trees, and other obstacles while ensuring a consistent, professional finish.

Equipped with a powerful engine, the Cub Cadet Z-Wing 48 delivers reliable performance. Its heavy-duty, high-torque engine provides the necessary power for demanding tasks, ensuring that users can tackle overgrown grass and tough terrain without sacrificing efficiency. The mower also features a robust transmission that offers smooth, responsive control, allowing operators to easily shift between forward and reverse with minimal effort.

In terms of comfort and ergonomics, the Cub Cadet Z-Wing 48 excels. The adjustable high-back seat ensures that operators can work for extended periods without discomfort. The user-friendly control panel is designed for ease of use, providing intuitive controls for speed and steering, as well as quick access to key functions. Additionally, the mower features an advanced suspension system that helps absorb shocks from uneven terrain, leading to a smoother ride.

Technologically, the Z-Wing 48 is equipped with advanced features that enhance its usability. The mower's LED headlights improve visibility during early mornings or late evenings, ensuring a seamless mowing experience regardless of lighting conditions. The model also offers easy-to-access maintenance points, making routine checks and upkeep simpler for users.

Durability is a hallmark of the Cub Cadet Z-Wing 48. Constructed with high-quality materials, this machine is built to withstand the rigors of frequent use, making it a long-term investment for those who demand both performance and longevity. Its corrosion-resistant deck and heavy-duty chassis contribute to its robust build, ensuring it remains in optimal condition for years to come.

In summary, the Cub Cadet Z-Wing 48 stands out with its cutting-edge design, powerful performance, and user-centric features. This mower is perfect for anyone looking to achieve professional-level results while enjoying the benefits of a zero-turn maneuverability, ultimately transforming lawn care into a pleasurable and efficient task.
Top Page Image Contents