Cub Cadet Z - Wing 48 Electrical Circuit, Specific Gravity Freezing Temp F, Battery Removal

Page 17

caps and drain oil from both left and right pumps. Replace and retighten nuts.

Hydraulic pumps

Unfasten hose and drain from

Figure. 8

this side of both pumps.

 

j.Coat new filter seal with oil before installa- tion. Install new hydraulic oil filter filled with new oil.

k.Add proper amount of hydraulic oil to res- ervoir.

l.Run and purge gearboxes. Check oil level.

m.Add proper amount of hydraulic oil to res- ervoir and repeat step L.

C.Electrical Circuit

Danger:

Read General Safety Precautions Nos. 9 and 10.

1.Battery: The battery is located beneath the operator’s seat. To keep the outside of the battery clean, brush on a strong solution of bicarbonate of soda and water and rinse with clean water. Keep the contacts and cable ends clean with a wire brush and make sure the connections are tight. Coat the terminals with petroleum jelly to prevent corrosion.

2.Battery Storage: When storing the Mower for long periods of time the following guidelines should be taken.

a.Disconnect the battery cables from the ter- minals and remove the battery.You will have to remove the control panel to access the battery strap. Replace control panel.

b.Clean the battery before storing. A dirty battery will lose its charge over time.

c.Store the battery with a full charge. A dis- charged battery will freeze (refer to the table below).

Specific Gravity

Freezing Temp (°F)

 

 

1.265

-71

 

 

1.250

-62

 

 

1.200

-16

 

 

1.150

5

 

 

1.100

16

 

 

d.Recharge battery when ever the specific gravity value is less than 1.225

3.Battery Removal

Warning:

When removing the cables from the battery follow these steps to avoid a short between the wrench and the frame.

a.Remove the Negative (black) cable.

b.Remove the Positive (red) cable.

c.Release the hold down straps.

d.Remove the battery without tipping.

4.Installing the Battery

Note: The battery is delivered from the fac- tory fully charged and filled with electrolyte.

a.Attach the Positive (red) cable.

b.Attach the Negative (black) cable.

c.Attach the rubber battery strap.

5.Jump Starting

Warning:

Failure to use this starting procedure can cause sparking, and the gases in the battery to explode.

a.Attach the end of the red jumper cable to the Positive terminal (+) of the charged battery.

b.Attach the other end of the red jumper cable to the Positive terminal (+) of the low charge battery.

c.Attach the end of the black jumper cable to the Negative terminal of the charged bat- tery.

d.Attach the other end of the black jumper cable to the frame of the unit with the low charge battery.

6.Fuses: There is one fuse located in the wiring between the ignition and start switch and

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Hydrostatic Zero-Turn Commercial Riding Mower Table of Contents Forward General General Safety OperationsSafety Precautions Related to Fuel When MowingShield Missing Do not Operate Safety Decals and LabelsSpecifications Operating Instructions When MowingSafety Awareness when Mowing To Mow Grass and Produce a Striped Pat- tern Deck Lift Handle Zero Turn Break-In And Operating Procedures Initial AdjustmentsPage Start the Engine Mower Deck Maintenance ServiceParking the Mower Removing the Mower DeckChanging the Blade Drive Belts Changing a BladeStop the engine and remove the key from the ignition switch Changing the Spindle AssemblyHydraulic Oil Adding Hydraulic Oil 5W40 full syntheticInstalling the Battery Battery RemovalElectrical Circuit Specific Gravity Freezing Temp FPage Inflation Pressure TiresHydraulic Oil Tank and Filter BrakesHydraulic System Storage Maintenance Schedule If Mower is so equipped OIL ChartEnginge RPM Check and Adjustment High Speed Tracking AdjustmentLap Bar Adjustment Deck Corner Ball Wheel Roller SettingsDeck Center Anti-Scalp Roller Settings Deck lift cable adjustment Procedure Deck leveling ProcedurePage Wiring Diagram Gaugeslope Maintenance Record Maintenance Record MANUFACTURER’S Limited Warranty Turf Equipment

Z - Wing 48 specifications

The Cub Cadet Z-Wing 48 is a premium zero-turn mower designed for both professional landscapers and homeowners who take their lawn care seriously. This innovative machine combines power, precision, and efficiency, making it an ideal choice for tackling large areas with ease and speed.

One of the standout features of the Z-Wing 48 is its unique wing-style deck, which allows for a wider cutting path than traditional zero-turn mowers. The mower boasts a versatile 48-inch cutting deck that provides exceptional maneuverability in tight spaces while still delivering a wide cut for larger open areas. This dual capability makes it perfect for navigating around flower beds, trees, and other obstacles while ensuring a consistent, professional finish.

Equipped with a powerful engine, the Cub Cadet Z-Wing 48 delivers reliable performance. Its heavy-duty, high-torque engine provides the necessary power for demanding tasks, ensuring that users can tackle overgrown grass and tough terrain without sacrificing efficiency. The mower also features a robust transmission that offers smooth, responsive control, allowing operators to easily shift between forward and reverse with minimal effort.

In terms of comfort and ergonomics, the Cub Cadet Z-Wing 48 excels. The adjustable high-back seat ensures that operators can work for extended periods without discomfort. The user-friendly control panel is designed for ease of use, providing intuitive controls for speed and steering, as well as quick access to key functions. Additionally, the mower features an advanced suspension system that helps absorb shocks from uneven terrain, leading to a smoother ride.

Technologically, the Z-Wing 48 is equipped with advanced features that enhance its usability. The mower's LED headlights improve visibility during early mornings or late evenings, ensuring a seamless mowing experience regardless of lighting conditions. The model also offers easy-to-access maintenance points, making routine checks and upkeep simpler for users.

Durability is a hallmark of the Cub Cadet Z-Wing 48. Constructed with high-quality materials, this machine is built to withstand the rigors of frequent use, making it a long-term investment for those who demand both performance and longevity. Its corrosion-resistant deck and heavy-duty chassis contribute to its robust build, ensuring it remains in optimal condition for years to come.

In summary, the Cub Cadet Z-Wing 48 stands out with its cutting-edge design, powerful performance, and user-centric features. This mower is perfect for anyone looking to achieve professional-level results while enjoying the benefits of a zero-turn maneuverability, ultimately transforming lawn care into a pleasurable and efficient task.
Top Page Image Contents