Driving on Slopes, Stopping the Tractor, Drawbar

Cub Cadet 2176 Driving on Slopes, Stopping the Tractor, Operating the Power TAKE-OFF PTO Clutch

DRIVING ON SLOPES

Refer to the SLOPE GAUGE on page 57 to help determine slopes where you may not operate safely.

WARNING

Do not mow on inclines with a slope in excess of 15 degrees (a rise of approximately 2-1/2 feet every 10 feet). The tractor could overturn and cause serious injury.

WARNING

Operate the tractor up and down slopes, never across slopes. Always drive up or down the face of a slope. Do not drive so that the tractor may tip over sideways .

Before operating the tractor on any slope, walk the slope to look for possible hazards such as rocks. mounds, ruts, stumps or other surface irregularities which could cause the tractor to be upset.

Back the tractor with implement up the steepest portion of each slope you intend to work. If the tractor cannot negotiate the slope in reverse, the slope is too steep to be worked.

Avoid turns when driving on a slope. If a turn must be made, turn down the slope. Turning up a slope greatly increases the chance of a roll over.

Avoid stopping when driving up a slope. If it is necessary to stop while driving up a slope, start up smoothly and carefully to reduce the possibility of flipping the tractor over backward.

STOPPING THE TRACTOR

CAUTION

Always engage the brake pedal lock, push the PTO switch to the “OFF” position, lower the equipment and shut off the engine before dismounting. Never try to start the engine while standing on the ground.

Fully depress the brake pedal to bring the tractor to a complete stop (and disengage the cruise control), engage the brake pedal lock, disengage the PTO, turn the ignition switch to “OFF’” and remove the key from the switch before dismounting.

OPERATING THE POWER TAKE-OFF (PTO) CLUTCH

Before operating the new clutch under load (mowing grass, etc.), perform the following break-in procedure:

1.Start and run the engine a few minutes to warm up.

2.With the mowing deck, snow thrower, etc. installed and the engine running at approximately 50% throttle, engage and disengage the clutch at ten second intervals (ten seconds ON-ten seconds OFF) five times. The engine choke may have to be pulled out slightly to accomplish this.

3.Increase the engine speed to 75% throttle and again engage and disengage the PTO clutch at ten second intervals five times.

4.Make certain the PTO is disengaged and stop the engine.

Operate the PTO clutch as follows:

1.Move the throttle control lever to approximately the mid throttle position.

2.Pull the PTO switch to the “RUN” position.

3.Advance the throttle lever to the operating speed (full engine speed).

4.The operator must remain in the tractor seat at all times. If the operator should leave the seat without turning off the power take-off switch, the tractor’s engine will shut off.

5.The PTO clutch cannot be operated when the tractor is driving in the reverse direction. The PTO switch must in the “OFF” position when the reverse control pedal is depressed, or the PTO clutch will automatically disengage. To re-engage the PTO clutch, release the reverse control pedal, move the PTO switch to the “OFF” position, then again pull the switch to the “RUN” position.

DRAWBAR

Drawbar type equipment must be hitched to the tractor only at the hitch hole in the drawbar (See Figure 9).

Figure 9

2176 specifications

The Cub Cadet 2176 lawn tractor is a powerhouse in the realm of residential lawn care, designed to provide users with enduring performance and exceptional features. Known for its reliability and user-friendly operation, this model combines power, comfort, and innovative technology, making it a preferred choice among homeowners.

At the heart of the Cub Cadet 2176 is its robust 17-horsepower Kohler engine. This engine not only ensures ample power for mowing but also handles larger lawns with ease. The hydrostatic transmission allows for smooth operation, offering easy speed adjustments without the need for shifting gears. This feature is particularly beneficial for those who need to navigate around obstacles or work in tighter spaces.

One of the standout characteristics of the Cub Cadet 2176 is its 42-inch cutting deck. This wide cutting path allows users to cover more ground in a shorter amount of time, making lawn maintenance more efficient. The deck is equipped with a washout port, enabling easy cleaning after use, which prolongs its lifespan and ensures optimal performance.

Comfort is a key consideration in the design of the 2176. The lawn tractor features a comfortable, adjustable seat that allows for prolonged use without discomfort. Additionally, the operator's presence control (OPC) ensures that the tractor stops when the operator leaves the seat, improving safety during operation.

Moreover, the Cub Cadet 2176 incorporates the company’s signature Cadet Smart technology, providing users with enhanced diagnostics and maintenance reminders. This technology enables users to monitor the tractor’s performance and receive alerts for maintenance tasks, ensuring that the machine runs efficiently year-round.

Another notable feature is the ease of use. The controls are strategically placed for simple access, allowing for intuitive operation. The tractor also supports a variety of attachments, including baggers, mulchers, and snow plows, making it a versatile choice for year-round functionality.

In conclusion, the Cub Cadet 2176 lawn tractor stands out for its blend of power, comfort, and advanced technology. With its powerful engine, efficient cutting deck, user-friendly controls, and innovative features, it is a reliable companion for maintaining a beautiful lawn. Whether dealing with weekly mowing duties or seasonal tasks, the Cub Cadet 2176 meets the demands of modern homeowners seamlessly.