Cub Cadet 2176 manual MANUFACTURER’S Warranty Coverage

Page 2

KOHLER CO.

FEDERAL AND CALIFORNIA EMISSION CONTROL SYSTEMS

LIMITED WARRANTY

UTILITY AND LAWN AND GARDEN ENGINES

The U.S. Environmental Protection Agency (EPA), the California Air Resources Board (CARB), and Kohler Co. are pleased to explain the Federal and California Emission Control Systems Warranty on your utility/lawn/garden equipment engine (herein engine). For California, engines produced in 1995 and later must be designed, built and equipped to meet the state’s stringent anti-smog standards. In other states, new 1997 and later model year engines must be designed, built and equipped, at the time of sale, to meet the U.S. EPA regulations for small non-road engines. The engine must be free from defects in materials and workmanship which cause it to fail to conform with U.S. EPA standards for the first two years of engine use from the date of sale to the ultimate purchaser. Kohler Co. must warrant the emission control system on the engine for the period of time listed above, provided there has been no abuse, neglect or improper maintenance.

The emission control system may include parts such as the carburetor or fuel injection system, the ignition system, and catalytic converter. Also included are the hoses, belts and connectors and other emission related assemblies.

Where a warrantable condition exists, Kohler Co. will repair the engine at no cost, including diagnosis (if the diagnostic work is performed at an autho- rized dealer), parts and labor.

MANUFACTURER’S WARRANTY COVERAGE

Engines produced in 1995 or later are warranted for two years in California. In other states, 1997 and later model year engines are warranted for two years. if any emission related part on the engine is defective, the part will be repaired or replaced by Kohler Co. free of charge.

OWNER’S WARRANTY RESPONSIBILITIES

(a)The engine owner is responsible for the performance of the required maintenance listed in the owner’s manual. Kohler Co. recommends that you retain all receipts covering maintenance on the engine. But Kohler Co. cannot deny warranty solely for the lack of receipts or for your failure to assure that all scheduled maintenance was performed.

(b)Be aware, however, that Kohler Co. may deny warranty coverage if the engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

(c)For warranty repairs, the engine must be presented to a Kohler Co. service center as soon as a problem exists. Call 1-800-544-2444 for the names of the nearest service centers. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding warranty rights and responsibilities, you should contact Kohler Co. Engine Service at 1-920-457-4441.

COVERAGE

Kohler Co. warrants to the ultimate purchaser and each subsequent purchaser that the engine will be designed, built and equipped, at the same time of sale, to meet all applicable regulations. Kohler Co. also warrants to the initial purchaser and each subsequent purchaser, that the engine is free from defects in material and workmanship which cause the engine to fail to conform with applicable regulations for a period of two years.

Engines produced in 1995 or later are warranted for to years in California. For 1997 and later model years, EPA requires manufacturers to warrant engines for two years in all other states. These warranty periods will be begin on the date the engine is purchased b the initial purchaser. If any emission related part on the engine is defective, the part will be replaced by Kohler Co. at no cost tot he owner. Kohler Co. is liable for damages to other engine components caused by the failure of a warranted part still under warranty.

Kohler Co. shall remedy warranty defects at any authorized Kohler Co. engine dealer or warranty station. Warranty repair work done at an authorized dealer or warranty station shall be free of charge to the owner if such work determines that a warranted part is defective.

Listed below are the parts covered by the Federal and California Emission Control Systems Warranty. Some parts listed below may require scheduled maintenance and are warranted up to the first scheduled replacement point for that part. The warranted parts are:

• Oxygen sensor (if equipped)

• Intake manifold (if equipped)

• Exhaust manifold (if equipped)

• Catalytic muffler (if equipped)

• Fuel metering valve (if equipped)

• Spark advance module (if equipped)

• Crankcase breather (if equipped)

• Ignition module(s) with high tension lead

• Gaseous fuel regulator (if equipped)

• Electronic control unit (if equipped)

• Carburetor or fuel injection system

• Fuel lines (if equipped)

Air filter, fuel filter, and spark plugs (only to first scheduled replacement point)

LIMITATIONS

This Emission Control System Warranty shall not cover any of the following:

(a)repair or replacement required because of misuse or neglect, improper maintenance, repairs improperly performed or replacement not conforming to Kohler Co. specifications that adversely affect performance and/or durability and alterations or modifications not recommended or approved in writing by Kohler Co.,

(b)replacement of parts and other services and adjustments necessary for required maintenance at and after the first scheduled replacement point,

(c)consequential damages such as loss of time, inconvenience, loss of use of the engine or equipment, etc.,

(d)diagnosis and inspection fees that do not result in eligible warranty service being performed, and

(e)any add-on or modified part, or malfunction of authorized parts due to the use of add-on or modified parts.

MAINTENANCE AND REPAIRS REQUIREMENTS

The owner is responsible for the proper use and maintenance of the engine. Kohler Co. recommends that all receipts and records covering the perfor- mance of regular maintenance be retained in case questions arise. If the engine is resold during the warranty period, the maintenance records should be transferred to each subsequent owner. Kohler Co. reserves the right to deny warranty coverage if the engine has not been properly maintained; how- ever, Kohler Co. may not deny warranty repairs solely because of the lack of repair maintenance or failure to keep maintenance records.

Normal maintenance, replacement or repair of emission control devices and systems may be performed by any repair establishment or individual; how- ever, warranty repair must be performed by a Kohler authorized service center. Any replacement part or service that is equivalent in performance and durability may be used in non-warranty maintenance or repairs, and shall not reduce the warranty obligations of the engine manufacturer.

2

Image 2
Contents Important Read Safety Rules and Instructions Carefully OPERATOR’S ManualMANUFACTURER’S Warranty Coverage Contents Tractor and Deck PreparationSafe Operation Practices General OperationIII. Children II. Slope OperationDo not IV. Service Deflector and Safety Graphic Product GraphicsTo the Owner Serial Number LocationSection I. Controls and Indicators Safety Interlock Switches Not ShownIGNITION/LIGHT Switch LOW OIL IndicatorPower TAKE-OFF PTO Control Switch Hour MeterBrake Pedal Lift Height IndicatorSeat Adjustment Lever Forward Control PedalHood and Side Panels Safety Interlock SwitchesFuel Tank Page Starting the Engine Section II. OperationBefore Operating Your Tractor Cold Weather Starting Tractor BREAK-IN ProcedureStopping the Engine Driving the Tractor Stopping the Tractor Operating the Power TAKE-OFF PTO ClutchDriving on Slopes DrawbarAdjusting the Brakes Section III. AdjustmentsAdjusting the Seat Wheel Alignment Front Wheel AdjustmentPivot BAR Adjustment Hydrostatic Neutral Adjustment Checking the Transmission Neutral SettingControl Adjusting Lift Assist Spring TensionFront Control Rod Rear Control Rod Hex Tap Screw Pivot Sleeve Neutral ArmCarburetor Adjustments Engine OIL Section IV. MaintenanceEngine Maintenance Checking the OIL LevelAdding OIL Draining OIL and Replacing OIL FilterFilling the Crankcase Hydrostatic Drive OIL Filter Checking Transmission OIL LevelAdding Transmission OIL AIR Cleaner Servicing the PrecleanerCleaning Engine Air Cleaner Cover Paper Element Wing NutElement Cover Air Cleaner Base Rubber Grommet Servicing the Paper ElementHeadlights Spark PlugFuel Filter Storage of the Battery General Battery InformationMaintenance of Battery Common Causes for Battery FailureBattery Installation Battery Removal or InstallationBattery Removal Wash Hands after handlingMounting Tires on the RIM TiresTire SizePounds per Square Inch SIDE-TO-SIDE Leveling Adjustment Section V. Mower DeckFront to Back Leveling Adjustment Finger guard Blade Hard Level Surface Measure This DistanceGauge Wheel Adjustment Washer Cutting Height AdjustmentFlat Rear Gauge WheelRemoval and Installation of Deck Assembly Removal of DeckFront Lift ROD Roller Bracket Installation of Deck Front Roller Bracket Lift ROD Install the forward end of the PTO belt on the PTO Maintenance Cleaning and Blade CareLubrication Installation of Mulching Plug Spindle Drive Belt ReplacementSection VI. OFF-SEASON Storage Mowing with Mulching Option Section VII. MowingMowing Optional Equipment and Accessories Maintenance Chart Month Season Yearly StoragePTO Clutch will not Engage Hard to StartEngine Operates Irregularly or Knocks Maintenance Trouble ShootingLack of Power NanceLubrication Table Lubrication Guide Lubrication Guide Guide Specifications EnginePage Slope Gauge Commercial USE CUB Cadet Corporation MANUFACTURER’S Limited Warranty Residential USEMaintenance Parts Chart

2176 specifications

The Cub Cadet 2176 lawn tractor is a powerhouse in the realm of residential lawn care, designed to provide users with enduring performance and exceptional features. Known for its reliability and user-friendly operation, this model combines power, comfort, and innovative technology, making it a preferred choice among homeowners.

At the heart of the Cub Cadet 2176 is its robust 17-horsepower Kohler engine. This engine not only ensures ample power for mowing but also handles larger lawns with ease. The hydrostatic transmission allows for smooth operation, offering easy speed adjustments without the need for shifting gears. This feature is particularly beneficial for those who need to navigate around obstacles or work in tighter spaces.

One of the standout characteristics of the Cub Cadet 2176 is its 42-inch cutting deck. This wide cutting path allows users to cover more ground in a shorter amount of time, making lawn maintenance more efficient. The deck is equipped with a washout port, enabling easy cleaning after use, which prolongs its lifespan and ensures optimal performance.

Comfort is a key consideration in the design of the 2176. The lawn tractor features a comfortable, adjustable seat that allows for prolonged use without discomfort. Additionally, the operator's presence control (OPC) ensures that the tractor stops when the operator leaves the seat, improving safety during operation.

Moreover, the Cub Cadet 2176 incorporates the company’s signature Cadet Smart technology, providing users with enhanced diagnostics and maintenance reminders. This technology enables users to monitor the tractor’s performance and receive alerts for maintenance tasks, ensuring that the machine runs efficiently year-round.

Another notable feature is the ease of use. The controls are strategically placed for simple access, allowing for intuitive operation. The tractor also supports a variety of attachments, including baggers, mulchers, and snow plows, making it a versatile choice for year-round functionality.

In conclusion, the Cub Cadet 2176 lawn tractor stands out for its blend of power, comfort, and advanced technology. With its powerful engine, efficient cutting deck, user-friendly controls, and innovative features, it is a reliable companion for maintaining a beautiful lawn. Whether dealing with weekly mowing duties or seasonal tasks, the Cub Cadet 2176 meets the demands of modern homeowners seamlessly.