
c.lubricate the wear points. Follow the Lubri- cation Chart.
d.After the first five hours, change the engine oil and engine oil filter.
B.Every 25 Hour Checks
1.Service the engine foam element air cleaner.*
2.Grease the three spindle bearings.
C.Every 50 Hour Checks
1.Change the engine oil. (Every 25 hours under heavy duty operation.)
2.Clean or replace the engine’s paper air cleaner element.*
3.Check the battery’s electrolyte level, if equipped with fill caps.
4.Clean the engine cooling fins and external surfaces.*
5.Lubricate wear points. Follow the Oil Chart.
6.Lubricate all grease fittings. Follow the
Lubrication Chart.
D.Every 100 Hour Checks
1.Change the engine oil filter. (Every 50 hours under heavy duty operation.)
2.Check the engine spark plugs.
*Perform maintenance more frequently under dusty conditions.
**Reference Engine Owner’s Manual
.
OIL CHART
Apply a few drops of SAE
Number of Oil Points | Description |
DAILY |
|
4 | Deck Suspension Pivots |
4 | Height Adjustment Turnbuckle Clevis Pin |
2 | Height Adjustment Handle Pivots |
2 | Height Adjustment Stop Pivots |
2 | Deck Lift Linkage Pivots |
2 | Transport Handle Pivots |
1 | Transport Handle Pin |
2 | Deck Frame |
WEEKLY |
|
1 | Seat Hinge |
2 | Steering Lever Linkage Rod End Bearings |
2 | Lever Return Assembly Rod End Bearings |
2 | Pump Control Lever Pivots |
2 | Grass Collection System Lid Hinges |
| (If Mower is so equipped) |
LUBRICATION CHART
Use a
No. of Grease Fittings | Description |
EVERY 25 HOURS |
|
3 | Blade Spindle Bearings |
WEEKLY |
|
2 | Front Caster Wheels |
2 | Front Caster Wheel Spindles |
4 | Mowing Deck Pivots |
2 | Deck |
2 | Mower Deck Ball Wheels |
22