Electrohome RV-3798 manual Programming the Remote to Control AN Audio Component, Audio Codes

Page 32

PROGRAMMING THE REMOTE

PROGRAMMING THE REMOTE TO CONTROL AN AUDIO COMPONENT

To program the remote for a remote-controllable audio component, point the remote at the component and press the correct component button: CD for a CD player, TAPE for a tape player, etc. Then, press POWER or CH + or CH – . If the component doesn’t respond, the remote needs to be programmed. Use the codes in the code list on the next page or on the sheet packed with your remote.

Follow these steps to program your remote to control your audio component:

1.Turn on the component to be programmed.

2.Look up the brand and corresponding code number in the code list on the next page or on the code sheet packed with your remote.

3.Press and hold the component button on the remote.

4.Enter the three-digit code from the code list.

5.Release the component button, then press POWER to see if the component responds to the remote commands. If it doesn’t, try pressing the component button, then POWER again.

6.Repeat steps 3 through 5 using the next code listed for the brand of your component until the component responds to the remote commands.

This remote may not operate all models of the brands shown.

AUDIO CODES

ads:	AMP	001
Aiwa:	CD	060
Akai:	AMP	002, 008
Denon:	CD	057
Dynamic Bass:	AM/FM	029
	CD	025
	TAPE	026, 027
	PHONO	028
Emerson:	CD	066
Fisher	AMP	023
	CD	067
Hitachi:	CD	063
JVC:	AMP	016, 058
	AM/FM	030, 035
	CD	032
	TAPE	033, 034
	AUX	031
Kenwood:	AMP	017, 074
	AM/FM	074
	CD	067, 070, 077
	TAPE	071, 072
	PHONO	073
Kyocera:	AMP	009
Lotte (NEC):	AMP	075
Magnavox:	AMP	065
	AM/FM	065
	CD	061
Marantz:	AMP	022, 076
	AM/FM	076
	CD	068
Mitsubishi:	AMP	015, 059
	AM/FM	059
Nakamichi:	AMP	020
Onkyo:	AM/FM	082
	CD	078
	TAPE	080, 081
	PHONO	079
Panasonic:	AMP	012
	AM/FM	038
	CD	036, 083
	TAPE	037
Philips:	AMP	062
	AM/FM	062
	CD	061
Pioneer:	AMP	014
	AM/FM	042
	CD	039
	TAPE	040, 041
RCA:	AMP	024
	AM/FM	003
	CD	007, 043, 044
	TAPE	006
	PHONO	005
	AUX	004, 054
Realistic:	CD	063, 066
Sansui:	CD	045
Scott:	CD	066
	TAPE	055, 056
Sherwood:	AMP	011, 013
Sony:	AMP	021
	AM/FM	049
	CD	046
	TAPE	048, 053
	PHONO	047
Teac:	AMP	010
	CD	069
Technics:	AM/FM	052
	CD	050
	TAPE	051
Yamaha:	AMP	018, 019

30

Image 32

Contents USER’S Guide Safety Information Table of Contents Table of Contents First Things First First Things FirstTV only Unpack the ReceiverConnect the Receiver Turn on the Receiver PUT Batteries in the RemotePlug in the Receiver Page Operating the Receiver Operating the ReceiverTuning the Receiver Using Remote TuningAuto Tuning Storing Stations in MemoryPreset Scanning To Play a Preset StationBalancing the Speaker System To Balance the SpeakersTo Change the Video Source and Swap the Audio Using Swap AudioTo USE Swap Audio Page 3TOUR of the Receiver Tour of the ReceiverButtons and Connections Front Panel 160W, 5 ChannelTour of the Receiver Status Indicators Front Panel DisplaysFunction Displays Mode DisplaysSurround Memory Receiver Controls Remote ControlBasic Controls TV Controls Surround Sound Level ControlsRECEIVER/TUNER Controls VCR Controls DVD Player Controls Satellite Receiver ControlsCD Player Controls Tape Deck ControlsLaserdisc Player Controls Back Panel AudioProgramming the Remote 4PROGRAMMING the RemoteProgramming the Remote Programming the Remote to Control a TVRemote TV Codes AOCProgramming the Remote to Control VCR Remote VCR Codes This remote may not operate all models of the brands shown Programming the Remote to Control AN Audio ComponentAudio Codes Remote Controllable Cable BOX Codes Programming the Remote to Control a Cable BOXProgramming the Remote to Control a Laserdisc Player Laserdisc Player CodesProgramming the Remote to Control a DVD Player Receiver Remote works like DVD RemoteProgramming the Remote to Control AN RCA Brand DSS Receiver Programming the Remote to Control a Satellite ReceiverSatellite Receiver Codes Receiver Remote works like RCA DSS RemotePage Appendix a Connecting the Receiver Things to Know Before Connecting the ComponentsUsing the Switched Outlet Using the Subwoofer ConnectionsProtect Your Components From Overheating AC OutletsUsing this Connection TV and VCRThis Connection Provides To USE this CONNECTION, YOU should haveRCA DSS Receiver To USE this CONNECTION, YOU Must haveTo watch TV programs in stereo To watch satellite programmingDiagram B Press DVD to put the receiver in DVD mode Press playDVD Player To play a DVDSecond VCR To play a tape on the second VCRCamcorder or Video Camera To play the camcorderLaserdisc Player To play the laserdiscCompact Disc Player To play a CDTape Deck or Minidisc Player To play a tapeTo record a tape To play a minidiscFM Wire Antenna AntennasTo listen to the radio AM Loop AntennaSpeakers Example Appendix B Speaker PlacementSpeaker Placement Appendix C Troubleshooting Troubleshooting GuideRemote Control Operation RECEIVER/TUNER OperationAppendix D Care and Cleaning Care and CleaningAppendix E FCC Information FCC InformationAppendix F Limited Warranty Limited WarrantyAppendix G Equipment Specifications Equipment SpecificationsAppendix G Equipment Specifications Appendix H Preset Station List Form Preset Number Band FrequencySymbols IndexPIP VCR Tocom