Electrohome RV-3798 Programming the Remote to Control a Laserdisc Player, Laserdisc Player Codes

Page 34

PROGRAMMING THE REMOTE

PROGRAMMING THE REMOTE TO CONTROL A LASERDISC PLAYER

You may be able to program your remote to control a laserdisc player. Use the codes shown to the right or on the sheet packed with your remote.

Follow these steps to program your remote to control your laserdisc player:

1.Turn on the laserdisc player.

2.Look up the brand and its code number(s) in the code list.

3.Press and hold the LD•VCR2 button on the remote.

4.Enter the three-digit code from the code list.

5.Release the LD•VCR2 button, then press POWER to see if the laserdisc player responds to the remote commands. If it doesn’t, try pressing LD•VCR2, then POWER again.

6.Repeat steps 3 through 5 using the next code listed for your brand until the laserdisc player responds to the remote commands.

LASERDISC PLAYER CODES

Pioneer	033, 037
ProScan	033, 037
RCA	033, 037

PROGRAMMING THE REMOTE TO CONTROL A

DVD PLAYER

The remote is preprogrammed to control a RCA DVD player. A few of the remote buttons used with a DVD player are shown below. You may want to experiment with other buttons on the remote to see if they work with

your DVD player.

Receiver Remote (works like) DVD Remote

INFO	INFO
GO BACK	GO BACK
CLEAR	CLEAR
MENU SELECT	MENU SELECT
MOVE Arrows	ARROWS
PLAYLIST	PLAYLIST
ENTER	ENTER

This remote may not operate all models of the brands shown.

32

Image 34

Contents USER’S Guide Safety Information Table of Contents Table of Contents First Things First First Things FirstConnect the Receiver Unpack the ReceiverTV only Plug in the Receiver PUT Batteries in the RemoteTurn on the Receiver Page Operating the Receiver Operating the ReceiverAuto Tuning Tuning the Receiver Using RemoteTuning Storing Stations in MemoryPreset Scanning To Play a Preset StationBalancing the Speaker System To Balance the SpeakersTo USE Swap Audio Using Swap AudioTo Change the Video Source and Swap the Audio Page Buttons and Connections Tour of the Receiver3TOUR of the Receiver Front Panel 160W, 5 ChannelTour of the Receiver Status Indicators Front Panel DisplaysSurround Memory Mode DisplaysFunction Displays Basic Controls Remote ControlReceiver Controls RECEIVER/TUNER Controls Surround Sound Level ControlsTV Controls VCR Controls DVD Player Controls Satellite Receiver ControlsCD Player Controls Tape Deck ControlsLaserdisc Player Controls Back Panel AudioProgramming the Remote 4PROGRAMMING the RemoteProgramming the Remote Programming the Remote to Control a TVRemote TV Codes AOCProgramming the Remote to Control VCR Remote VCR Codes Audio Codes Programming the Remote to Control AN Audio ComponentThis remote may not operate all models of the brands shown Remote Controllable Cable BOX Codes Programming the Remote to Control a Cable BOXProgramming the Remote to Control a DVD Player Programming the Remote to Control a Laserdisc PlayerLaserdisc Player Codes Receiver Remote works like DVD RemoteSatellite Receiver Codes Programming the Remote to Control AN RCA Brand DSS ReceiverProgramming the Remote to Control a Satellite Receiver Receiver Remote works like RCA DSS RemotePage Appendix a Connecting the Receiver Things to Know Before Connecting the ComponentsProtect Your Components From Overheating Using the Switched OutletUsing the Subwoofer Connections AC OutletsThis Connection Provides Using this ConnectionTV and VCR To USE this CONNECTION, YOU should haveTo watch TV programs in stereo RCA DSS ReceiverTo USE this CONNECTION, YOU Must have To watch satellite programmingDVD Player Diagram BPress DVD to put the receiver in DVD mode Press play To play a DVDSecond VCR To play a tape on the second VCRCamcorder or Video Camera To play the camcorderLaserdisc Player To play the laserdiscCompact Disc Player To play a CDTo record a tape Tape Deck or Minidisc PlayerTo play a tape To play a minidiscTo listen to the radio FM Wire AntennaAntennas AM Loop AntennaSpeakers Speaker Placement Appendix B Speaker PlacementExample Remote Control Operation Appendix C TroubleshootingTroubleshooting Guide RECEIVER/TUNER OperationAppendix D Care and Cleaning Care and CleaningAppendix E FCC Information FCC InformationAppendix F Limited Warranty Limited WarrantyAppendix G Equipment Specifications Equipment SpecificationsAppendix G Equipment Specifications Appendix H Preset Station List Form Preset Number Band FrequencySymbols IndexPIP VCR Tocom