Cub Cadet GT 3200 Driving On Slopes, Stopping The Tractor, Using the Hydraulic Lift System

Page 17

Driving On Slopes

Refer to the SLOPE GAUGE on page 8 to help determine slopes where you may not operate safely.

WARNING: Do not mow on inclines with a slope in excess of 15 degrees (a rise of approximately 2-1/2 feet every 10 feet). The tractor could overturn and cause serious injury.

Operate the tractor up and down slopes, never across slopes. Do not drive so that the tractor may tip over sideways

Before operating the tractor on a slope, walk the slope to look for possi- ble hazards such as rocks, mounds, stumps, or surface irregularities which could cause the tractor to be upset.

Back the tractor with attachment up the steepest portion of each slope you intend to work. If the tractor cannot negotiate the slope in reverse, the slope is too steep to be worked.

Avoid turns when driving on a slope. If a turn must be made, turn down the slope. Turning up a slope greatly increases the chance of a roll over.

Avoid stopping when driving up a slope. If it is necessary to stop while driving up a slope, start up smoothly and carefully to reduce the possibility of flipping the tractor over backward.

Stopping The Tractor

Fully depress the brake pedal to bring the tractor to a complete stop, engage the parking brake, disengage the PTO, turn the ignition switch to “STOP’” and remove the key from the switch before dismounting.

Using the Hydraulic Lift System

To raise an attachment using the hydraulic lift system, the engine must be running. Generally, an attachment can be lowered with the engine running or off. Push the hydraulic lift lever forward to lower an attachment or pull the hydraulic lift lever back to raise an attachment.

Auxiliary Hydraulics

The tractor auxiliary hydraulic circuit consists of two hydraulic outlets with male and female quick connect cou- plers. The outlets are located beneath the front of the left running board, and are normally used for connecting the optional Hydraulic Front Hitch Kit.

The auxiliary hydraulic lever on the left fender controls the oil flow through the auxiliary hydraulic circuit. The engine must be running to utilize the auxiliary hydraulic system. The lever is nor- mally used to raise and lower the front hitch. If correctly installed, pushing the lever forward (downward) will lower the front hitch and pulling the lever rearward (upward) will raise it.

Always refer to the manual of the spe- cific attachment for the correct con- nection and operating instructions.

Opening Tool Box

A tool box and manual pouch is located under the seat. To access this area, pivot the seat forward.

Engaging The PTO

•Move throttle control lever to ap- proximately the mid throttle position.

•Pull the PTO switch to the “RUN” position.

•Advance the throttle lever to the operating speed (full engine speed).

•The operator must remain in the tractor seat at all times. If the operator should leave the seat without turning off the PTO switch, the tractor’s engine will shut off.

•With key switch in “NORMAL MOWING” position ONLY: The PTO clutch cannot be operated when the tractor is driven in the reverse direction. In the “NORMAL MOWING” position, the PTO clutch will automatically disengage when the reverse pedal is depressed. To re-engage the PTO clutch, release the reverse control pedal, move the PTO switch to the “OFF” position, then again pull the switch to the “RUN” position.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Series 3000 Tractor Model GT OPERATOR’S ManualTo the Owner Table of ContentsGeneral Operation When you see this symbol. Heed ITS WarningImportant Safe Operation Practices Slope Operation Never carry passengersDo not use a grass catcher on steep slopes Do NotChildren Be alert and turn machine off if a child enters the areaGeneral Service ServiceTowing Safe Handling of GasolineDo Not Modify Engine Never tamper with factory setting of engine governorSpark Arrestor Average Useful LifeSight and hold this level with a vertical tree Slope GuidePosition the High Back Seat Deck Front Lift Rod AssemblyTractor Preparation Controls and Features Indicator Panel/Hour Meter Low Fuel Indicator LampSteering Wheel LCD Hour Meter DisplayButton Key Switch ModuleIndicator Light 12V Power Outlet PTO SwitchSeat Adjustment Lever Parking Brake Lever Forward PedalLower Raise Operation Safety Interlock SwitchesChoke Lever Starting The EngineDriving The Tractor Setting The Cruise ControlStopping The Engine Driving On Slopes Using the Hydraulic Lift SystemStopping The Tractor Auxiliary HydraulicsReverse Caution Mode Using the Reverse Caution Mode key positionMowing Using The DrawbarEngaging Differential Lock Adjustments and Maintenance Operating Transmission Range Oil Fill Tube Dipstick Checking Transmission Oil LevelTire Inflation Battery MaintenanceBattery Storage Operation to Maintenance ChartBe performed Grease front wheel bearingsLubrication Illustration General Battery Information ServiceBattery Removal Charging the BatteryDipstick must be installed Headlight Bulb Replacement Adding Transmission OilAll times when the engine is Securely into the fill tube atChanging Transmission Oil Electrical Box Adjusting the BrakeFuse Front Wheel AlignmentChanging the Engine Oil and Filter AssemblyHex Shaped Flange Hex Nylon Lock Nut Off-Season Storage If using a fuel stabilizerOWNER’S Warranty Responsibilities MANUFACTURER’S Warranty CoverageEngine Information CoverageLimitations Maintenance and Repairs RequirementsAdding Engine Oil Cleaning The EngineChecking Engine Oil Level Changing Engine Oil Changing Fuel Filter Changing Air CleanerSparkplugs Servicing Oil Cooler Servicing The PrecleanerServicing The Paper Element Lack of Power Trouble ShootingHard To Start Engine Operates Irregularly or KnocksDescription Model Number Optional EquipmentTires SpecificationsBrakes Oil Filter Cartridge Crank Case CapacityPRE-CLEANER Replacement PartsDescription Part Number CartridgeGeneral Emissions Warranty Coverage Warranted Parts GDOC-100092 REV. a MTD Products Limited, Kitchener, on N2G 4J1, Phone Transportation charges and service callsU.S.A Canada
Related manuals
Manual 48 pages 30.97 Kb

GT 3200 specifications

The Cub Cadet GT 3200 is a powerful garden tractor that combines robust performance with innovative technology, making it ideal for homeowners and landscapers alike. This formidable machine is equipped with a heavy-duty Kohler engine, offering a variety of horsepower options to meet diverse needs. Whether used for mowing large lawns or tackling tough garden tasks, the GT 3200 proves to be a reliable workhorse.

One of the highlights of the GT 3200 is its Hydrostatic transmission, which provides seamless speed control without the need for manual gear shifting. This feature allows operators to easily navigate varying terrains, ensuring smooth operation in both forward and reverse. The precision steering system enhances maneuverability, making it easier to negotiate tight spaces and garden beds.

The GT 3200 boasts a cutting deck available in various sizes, including 48-inch and 54-inch options. This adaptability enables users to choose the size that best fits their mowing requirements. The deck is designed for efficiency, with dual-blade construction that delivers a clean, even cut across different grass types and terrain. Additionally, the deck’s adjustable cutting height allows for customized results, catering to users' specific aesthetic preferences.

Another notable characteristic of the Cub Cadet GT 3200 is its modular design, which allows for easy attachment of various implements. This versatility makes the GT 3200 suitable for multiple tasks, from mowing to snow clearing or tilling, as it can be equipped with a range of attachments such as snow blowers, front blades, and garden tillers.

Cub Cadet has integrated advanced technology in the GT 3200, including a digital gauge cluster that provides vital information at a glance, such as fuel levels and engine performance metrics. This technology enhances user experience and helps operators maintain optimal performance.

In terms of comfort, the GT 3200 comes with an ergonomic seat and intuitive controls, ensuring that operators can work for extended periods without discomfort. The high-back seat provides excellent support, and the easy-to-reach controls simplify operation, making mowing and gardening tasks less strenuous.

In summary, the Cub Cadet GT 3200 is a versatile, powerful, and technologically advanced garden tractor that offers a wide range of features designed to enhance performance and user experience. Whether for comprehensive lawn care or diverse landscaping tasks, the GT 3200 stands out as a top choice for those seeking quality and reliability in outdoor equipment.
Top Page Image Contents